Products

Foster® 40-30C Protective Coating is a low-odor, fast-setting, water-based surfacing material intended for field or shop application to faced or unfaced fiberglass duct liner, fiberglass duct board insulation, or galvanized surfaces. Its low viscosity makes it suitable for application with a wide range of spray equipment currently available on the market.

Foster® 40-20™ Fungicidal Protective Coating is a polyacrylate copolymer emulsion designed for long-term fungicidal effectiveness that remains active even as it ages. This formulation is highly effective at inhibiting the growth of mold and odor-causing bacteria on its surface. It offers a resilient, elastic, and decorative finish that accommodates movement without developing crevices where bacteria can lodge.

TEC® LiquiDam™ Penetrating Moisture Vapor Barrier (213) is a low-viscosity, high-penetration, two-part, 100% solid epoxy. It is specially formulated to be applied to damp or new concrete, as little as 48 hours old, with a moisture vapor emission rate (MVER) less than or equal to 25 lbs. per 1,000 ft² per 24 hours (0.12 kg/m² per 24 hours) or a maximum relative humidity of 100%. It is designed to reduce the MVER to less than 3 lbs. per 1,000 ft² per 24 hours (0.015 kg/m² per 24 hours). LiquiDam™ is colored blue for visual assurance of coverage during the application process. Only one coat is required to penetrate and fill voids and gaps to fully seal the substrate, which quickly cures in as little as 4 - 5 hours to provide the benefit of same-day installation. LiquiDam™ is a moisture vapor barrier for the installation of floor coverings, tile, stone, and concrete toppings. Ideal for use with other TEC® adhesive, patch, underlayment, leveler, and mortar products.

Apollo Roofing RoofPrime Self-Adhered Membrane Primer is a solvent-based self-adhered membrane primer made from synthetic rubber. It is specifically formulated for activating AVCL layers, SA membranes, and torch-on systems. This primer has a fast drying time, which helps minimize project time. It can be easily applied using a brush, roller, or spray method. It is used for improving the adhesion properties of roof decks and treating porous and dusty surfaces, making it suitable for single-ply membrane adhesives.

TEC® Multipurpose Primer TA-560 is an acrylic latex-based primer designed for use with TEC® self-leveling underlayments. It can also facilitate the bonding of other TEC® surface preparation products and latex-modified thin-set mortars to challenging substrates like metal, glazed ceramic tile, gypsum-based underlayments, and concrete treated with specific types of curing compounds (silicate or acrylic resin curing compounds only). It's also effective for priming resin and metal backings on natural stone, allowing for installation with latex-modified thin-set instead of epoxy mortar. Additionally, it can promote bonding over cold-rolled steel substrates.

TEC® Ready-To-Use Grout (647) is a premixed grout that delivers durable, stain-resistant grout joints. TEC® Ready-To-Use Grout is for residential use in intermittently wet as well as dry areas. It can also be used to grout over existing premixed or cementitious grout installations. TEC® Ready-To-Use Grout is formulated with very fine particles of sand and may be used in grout joints as small as 1⁄16" (1.6 mm). (Please see limitations regarding surfaces that might be sensitive to scratching).

Magik 40X25 is a premium quality, water-based, antimicrobial, and fungicidal protective coating. It prevents and eliminates residual mold and mildew from contaminated surfaces and protects various surfaces such as metal, GI, masonry, and wood from fungal growth. Formulated with a special type of synthetic resin and high-performance additives, Magik 40X25 is a low-odor coating designed to inhibit the growth and spread of odor-causing bacteria, mold, and mildew on multiple surfaces.

Foster® 40-30™ Fungicidal Protective Coating is a low-odor, fast-setting, water-based surfacing material specifically crafted for field or shop application to faced or unfaced fiberglass duct liner, fiberglass duct board insulation, or galvanized surfaces. This formulation is highly effective at preventing the growth of mold and odor-causing bacteria on its surface for an extended period of time.

UltraShield AC 14 is a premium quality, single-component, flexible, acrylic-based waterproofing and protective coating ideal for roof and wet area applications. It is designed to provide a tough barrier against weathering agents and UV, and it also functions as an anti-carbonation coating. Upon full cure, the coating forms a tough, resilient, yet flexible barrier.

Apollo Roofing RoofPrime Fast-Drying PVC Primer is a fast-drying PVC primer based on solvent-based polyurethane. It is specifically designed to improve the adhesion between PVC membranes and liquid roofing systems, promoting the longevity of the roof. This primer is easy to apply using a brush or roller. It is used for improving the adhesion properties between PVC-based membranes and liquid roof coatings in liquid-applied membrane systems.

Foster® H.I. Mastic® 90-07 is a durable protective weather coating specifically designed for outdoor use over thermal insulation when an economical breathing mastic is needed. This asphalt emulsion product is crack-resistant, even at critical right-angle bends during curing. It exhibits exceptional weathering stability, resulting in a firm and durable surface that withstands acids, alkalies, abrasion, and typical outdoor industrial conditions.

TEC® InColor® Advanced Performance Grout (575) is a ready-to-use product within the TEC high-performance family of grouts. Its unique formulation is easy to install and is made for residential or commercial use. InColor is easy to clean, mold and mildew-resistant, color consistent, crack resistant, stain-proof *, chemically resistant, and requires no sealing. This universal formula can be used for grout joints in walls from 1/16" to 1/4" (1.6–6 mm) and in floors from 1/16" to 1/2" (1.6-13 mm) and is backed by a limited lifetime warranty.

Millennium Primer 240 is a rubber polymer-based primer used to prepare the surface of single-ply TPO and EPDM roofing membranes for improved adhesion to seam tapes, cover tapes, and flashing tapes. Primer 240 has been formulated with VOC-exempt solvents for use in regulated markets where other solvent-borne primers cannot be used. This primer does not react with atmospheric moisture, allowing it to be opened and resealed for use at a later date.

Apollo Roofing RoofPrime Fast-Cure Reactivation Primer is a fast-cure reactivation primer based on reactive polyurethane. It is designed to improve the inter-layer adhesion between coats, ensuring the longevity of the roof. This primer offers a simple application method and is specifically used for reactivating existing polyurethane liquid coatings after the standard over-coating window has expired in liquid-applied membrane systems.

FAST 2K™ DECK POST ANCHOR is a patented expanding composite designed to fill the peripheral void between a post and the hole for load-bearing applications. This product builds on the technology of the award-winning and widely successful FAST 2K™ and pole-setting expanding composite backfill used to set fences and utility poles for more than 20 years. The expanding nature of this product allows the use of up to 90% less weight in the FAST 2K™ DECK POST ANCHOR compared to concrete.