Products

Advantra® Earthic™ 9441CN water-based barrier coating is for paper coaters and packaging makers who want to improve recyclability of paperboard packaging by transitioning from polyethylene to water-based coatings while achieving Total Cost of Ownership (TCO) as similar to polyethylene as possible.

Childers® Chil-Low™ CP-38 AF Fungus Resistant Vapor Retarder Coating is a water-based, high solids, flexible solution designed to serve as a vapor retarder coating. This versatile coating is suitable for various insulation types, including polystyrene foam, and can also be applied over dry concrete and insulating cement to provide effective vapor retardation.

Foster® Insulfas™ 31-31 Coating is a durable, light-colored coating designed for indoor applications on thermal insulation. It is also used to cement laps of canvas or glass-lagging cloth. This coating offers protection for insulation on air conditioning ducts and cold water piping. The effectiveness of this finish system relies on applying it over adequate insulation to ensure that, under operating conditions, the surface temperature remains above the dew point temperature.

Apollo Roofing RoofPrime Hot Melt Waterproofing Primer is a solvent-based hot melt waterproofing primer made from synthetic rubber. It was developed specifically to improve adhesion between bitumen hot melt waterproofing and concrete surfaces. This primer minimizes project time and offers a simple application method. It is used for improving the adhesion between bitumen hot melt waterproofing and concrete, making it an excellent choice for modified bitumen membranes and flashing adhesives.

Foster® Monolar® Coating 60-96 is a durable and flexible elastomeric finish specially formulated to protect outdoor thermal insulation. This coating contains chlorosulfonated polyethylene rubber. It serves as an effective vapor retardant for low-temperature insulation applications on tanks, pipelines, vessels, ductwork, and fittings.

Tuskbond SC12 - 500ml Aerosol is a Solvent Cleaner is a blend of organic solvents designed to quickly remove adhesive overspray, oil and grease deposits from most surfaces. SC12 can effectively be used on a wide range of substrates.

Foster® Weatherite™ Mastic 46-10 is a water-based weather barrier mastic suitable for various applications over most thermal insulations, including polystyrene. This mastic offers excellent brush, trowel, and spray properties, is non-flammable when wet, and has a mild odor during application.

HydroArmor® 7763 is a sprayable latex coating designed for use on aluminum, fiberglass, cold-rolled steel, galvanized steel, and most metal primers. It is formulated with additives to improve adhesion to oily metals. It provides very good corrosion protection, even when applied as thinly as 10 mils wet. This low-viscosity, sag-resistant coating can be easily sprayed onto exposed underbody areas and into restricted areas such as tubing and "hidden" areas accessible only with spray wands. Wet film builds of up to 20 mils can be applied without runs, drips, or sags.

TEC® LiquiDam® EZ TA-214 is a one-part, highly engineered polymeric emulsion moisture mitigation formula. It is colored blue for visual assurance during application and requires two coats to fully seal the substrate. It dries quickly in as little as 3–4 hours and does not require a primer before applying TEC surface preparation products. TEC® LiquiDam® EZ TA-214 serves as a moisture vapor barrier for installing floor coverings, tiles, and stones.

H.B. Fuller 20277 is a one-component, water-based fugitive adhesive and coating material designed for fast drying, clean machining, non-blocking, and excellent lay-flat and humidity resistance. It is suitable for spray, pattern, and extrusion applications and can be used to protect metals, fiberglass, contoured sheets, and other surfaces from weathering and discoloration during transportation.

Swift®prime 4160 is a solvent-based primer specifically designed for the adhesion promotion of ABS foils in the woodworking industry. This primer offers high heat resistance and is free from NEP and NMP. It is commonly used to enhance the adhesion of edge bands and foils, ensuring a reliable bond in decorative applications.

Intrafol™ 1175 is a solvent-based primer for PVC edges that is NEP, NMP, and toluene-free. It offers improved machinability and has a medium viscosity and medium drying time. It is used for adhesion promotion in edgebands and foils in the woodworking industry, including decorative edges and foils.

Intrafol™ 1383 is a solvent-based universal primer designed for ABS and PP substrates. It has low blocking properties and is chlorine-free. This primer is commonly used for adhesion promotion in edgebands and foils within the woodworking industry, making it an ideal choice for priming applications. It has a very low hazard statement for solvents and is a PVC-free primer that complies with the IOS MAT 066 norms.

Apollo Roofing RoofPrime Fast-Drying PVC Primer is a fast-drying PVC primer based on solvent-based polyurethane. It is specifically designed to improve the adhesion between PVC membranes and liquid roofing systems, promoting the longevity of the roof. This primer is easy to apply using a brush or roller. It is used for improving the adhesion properties between PVC-based membranes and liquid roof coatings in liquid-applied membrane systems.

Intrafol™ 1226 is a solvent-based primer specifically formulated for ABS edges. It is free from NEP, NMP, toluene, and THF. This primer offers good machinability and provides a homogeneous application. It is primarily used for adhesion promotion in edgebands and foils within the woodworking industry.