Products

Fulltak™ SE 7603 is a water-based adhesive made from pure acrylic. It offers a peelable film with smooth peel and low build, clear coating, excellent aging performance, and resistance to plasticizers. Ideal for applications requiring durable and removable bonding.

Swift®tak 3570 is a water-based casein adhesive suitable for high-speed labeling on bottling lines. It offers excellent wash-off qualities and provides very strong wet tack, as well as excellent ice water resistance (IWR) and can-to-wrap (CWR). It is commonly used for beverage labeling on beer, mineral water, wine, and soft drinks, as well as paper and metallized paper labels and aluminum foil on glass bottles, both returnable and non-returnable. It is suitable for container labeling.

H.B. Fuller EA6035 is a fast UV-cure adhesive. This product is suitable for bonding a wide variety of substrates, including glass, plastic, and metal. The product has shown excellent adhesion and a high degree of flexibility for use in high-stress or mismatched CTE bonding applications.

FULLABOND TW 26 is a versatile adhesive specifically designed for various paper converting applications. It is ideal for tasks such as board lamination and tube or core winding. This adhesive offers excellent adhesion to a wide range of paper substrates, while also providing good water resistance. With its superior wet tack properties and fast speed of set, FULLABOND TW26 ensures reliable bonding in demanding paper converting processes.

H.B. Fuller 20852 is a two-component, water-based sprayable polychloroprene contact adhesive that provides good wet grab and immediate bonds with high strength. It is used for bonding and laminating open-cell urethane foams and other porous or non-porous surfaces, such as closed-cell foams, woods, metals, plastics, and fabrics.

Sesame® Kraft Backed Tape KB1912S-064KB is a kraft paper-backed tape that is reinforced with parallel synthetic filaments. One side of the tape is coated with a hot melt adhesive. It is used as a reinforcement and/or opening feature in corrugated containers. The Sesame® Tape dispensing system is used to place Sesame® Kraft Backed Tape across the web at the double-backer station of the corrugator. It is bonded to the top of the inside liner. It can be run continuously by utilizing the automatic Sesame Connect™ splice in conjunction with an H.B. Fuller dispensing system.

H.B. Fuller MP5430 is a two-part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough, semi-rigid material with a free-flowing viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 volume mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 20 - 30 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

H.B. Fuller FH8801 is a one-part acrylate adhesive that undergoes heat curing. It offers fast curing at low temperatures and provides outstanding bond strength. This adhesive is commonly used for chip bonding in microelectronic, MEMS, and opto-electronic applications. It is especially suitable for in-line production as it has the ability to snap cure. FH8801 is an ideal heat cure acrylic for chip bonding and other electronics applications, including electric motors.

Cyberbond CB 2244 is a partly flexible cyanoacrylate, also known as rubber tough. It allows dynamic and temperature-loaded bonds and guarantees certain shock-absorbing properties. This grade is also ideal for combination bondings such as metal-to-rubber or metal-to-plastic.For this range of products, CB 2244 has the lowest viscosity.

H.B. Fuller SIGEL is a surface-insensitive cyanoacrylate adhesive. This high-viscosity gel is used in applications that require faster cure speeds on parts that are dry and on parts that may be acidic. The SI series bonds a wide range of similar and dissimilar surfaces. This series provides exceptional performance in a wide range of applications.

H.B. Fuller FH7011 is a 1K acrylate anaerobic adhesive specifically designed for metal structure bonding. This adhesive is a one-part acrylic anaerobic adhesive used for bonding ferrites to electro-plated materials in electric motors. Its main uses include structure bonding and serving as an anaerobic adhesive for electric motor bonding in portable devices and electric motors.

Rakoll® 4020 is a non-labeling, reactive hot melt adhesive designed for edgebanding applications. It has a low monomer content (<0.1%) and is developed to meet the demand for high-performance adhesives. Rakoll 4020 has good initial strength and is suitable for bonding various edge materials.

H.B. Fuller FH8805 is a single-component adhesive that cures by heat. It has fast curing at low temperatures and outstanding bond strength. This material is recommended for use with chip bonding in microelectronic, MEMS, and opto-electronic applications. This material is able to snap-cure during in-line production.

Weld Mount FN832SS is a reliable industrial solution. Categorized under equipment and parts, it's an adhesive equipment consumable. Enhance processes with this floating nut plate, which is suitable for through-hole and blind mounting applications. The material is 304 Stainless steel or Rubber.

Tuskbond SC12 - 500ml Aerosol is a Solvent Cleaner is a blend of organic solvents designed to quickly remove adhesive overspray, oil and grease deposits from most surfaces. SC12 can effectively be used on a wide range of substrates.