Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features and Benefits
- One component, requires no mixing.
- Fast curing.
- Good adhesion to glass, many plastics and many metals.
- Good flexible.
- High resistance to yellowing.
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Instruction for Use
- This product is light sensitive, exposure to daylight, UV light and artificial lighting should be kept to a minimum during storage and handling.
- For best performance bond surfaces should be clean and free from grease, oil, dirt, or other contaminants.
- Cure rate is dependent on lamp intensity, distance from light source, depth of cure needed or bond line gap and light transmittance of the substrate through which the radiation must pass.
- Excess adhesive can be wiped away using organic solvents, e.g. IPA, MEK.
Properties
- Physical Form
- Appearance
- Clear liquid
- Physical Properties of Cured Material
Value Units Test Method / Conditions Hardness (100 mW/cm², at 365 nm, 24s) 62.0 - Shore D Tensile Strength (at Break, 100 mW/cm², at 365 nm, 24s) 16.0 MPa - Elongation at Break (100 mW/cm², at 365 nm, 24s) 355.0 % - Lap Shear Strength (Polycarbonate - Polycarbonate, 100 mW/cm², at 365 nm, 24s) 14.0 MPa - Refractive Index (100 mW/cm², at 365 nm, for 24s) 1.5 - - Volume Resistivity (100 mW/cm², at 365 nm, 24s) 8.0 x 10¹⁴ ohm - Surface Resistivity (100 mW/cm², at 365 nm, 24s) 8.0 x 10¹⁴ ohm - Dielectric Breakdown Strength (100 mW/cm², at 365 nm, 24s) 22.0 - - Dielectric Constant (at 1MHZ, 100 mW/cm², at 365 nm, 24s) 4.2/0.03 - - - Uncured Properties
Value Units Test Method / Conditions Viscosity (25°C, CP52, 100 rpm) 2,000 - 4,000 cP - Density 1.05 g/cm³ - - Typical Cured Properties
Value Units Test Method / Conditions Tack Free Time (100 mW/cm², at 365 nm) max. 6 s - Depth of Cure (100 mW/cm², at 365 nm, 24sec) 8.0 mm -
Technical Details & Test Data
- Curing Profile
Recommended cure：
- 100mW/cm2 at 365nm for 10s
Packaging & Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 12 Months
- Storage Conditions
Product shall be stored in a cool, dry area in unopened containers at a temperature between 8℃ to 25℃ unless otherwise labeled.