Magik 40X25

Identification

GBU

BAS

RTU Product Type

Waterborne Coating,

Insulating Coating

Categories

Markets → Building & Construction → Applications → Building Materials → Interior Fixtures

Technologies → Ready-to-Use Products → Product Families → Paints & Coatings → Protective Coatings

Applications

Application Area

Ceilings,

Pipes,

HVAC Ducts,

Wall,

Pipe Insulation

Application Method

Brush,

Spray

Compatible Substrates & Surfaces

Metal,

Wood,

Concrete,

Masonry,

Painted Surfaces

Applications & Uses

Application Procedure

• The surface should be structurally sound, clean, dry, leveled and free from dust, curing compounds, grease and other loose debris. Keep container closed when not in use.
• Apply MAGIK 40X25 at 0.50 l/m2 (subject to surface conditions) to obtain a wet film thickness of 0.50 mm per coat.
• It is very important to ensure that all the required surfaces are covered with the coating.
• Use clean paint brushes which are suitable for water-based paints.
• Apply with full brush and spread out evenly.

Product Applications

• MAGIK 40X25 is recommended for application to painted & unpainted wood, metal, masonry and concrete blocks etc. The protective coating can be applied over the exterior surfaces of ductwork.
• MAGIK 40X25 can also be used on walls, ceilings, pipes, wall cavities, crawl spaces, basement or wherever effective control from mold & microbial is needed.
• Note: We do not recommend the coating to be applied over the interior surfaces of ductwork.

Features

Ready-to-Use Product Features

Fungus Resistant,

Heat Resistance,

Low Emissions,

Mildew Resistant,

Thixotropic,

Water-based,

Mold Resistance,

High Coverage,

Anti-Fungal,

Antimicrobial

Features & Benefits

Labeling Claims

Lead-free,

Asbestos-free,

Non-Flammable,

Mercury-free

Product Features

• Excellent Anti-Microbial
• Highly Anti-Fungal
• Prevents and kills Residual Mold
• Protects Surfaces from Fungal Growth
• Excellent Coverage
• Heat Resistant
• Non-Flammable

Packaging & Availability

Regional Availability

• India/MiddleEast/Africa (IMEA)

Packaging Information

5 USG Plastic Pail

Physical Properties

Physical Form

Paste

Appearance

White thixotropic paste

Properties

Product Properties

• VOC Content: Meets requirements for LEED IEQ 4.2, Low Emitting Materials, Paints & Coatings.
• Coverage Range (subject to surface condition): Wet coverages shown below are for smooth non-porous surfaces. Porous or rough surfaces may require more litres to obtain required dry thickness.

Specifications

	Value	Units	Test Method / Conditions
Coverage (1.20 gal./100 ft²)	0.5	l/m²	-
Coverage Range (dry film thickness, 0.011 in.)	0.28	mm	-
Coverage Range (wet film thickness, 0.020 in.)	0.5	mm	-
Density	1.25 - 1.45	kg/L	ASTM D 1475-98
Drying Time (set to touch)	2 - 4	hours	ASTM D 1640
Drying Time (through dry)	8 - 12	hours	ASTM D 1640
Service Temperature (temperature at coated surface)	- 20 to 100	°C	-
Solid Content	67 - 73	%	ASTM D 2369
Viscosity	25000 - 50000	cPs	ASTM D 2196
Volatile Organic Compound Content	max. 50	g/L	ASTM D 2369-98

Typical Properties

	Value	Units	Test Method / Conditions
Storage Temperature	10 - 35	°C	-

Appearance

White thixotropic paste

Regulatory & Compliance

Quality Standards

ASTM G21,

ASTM D2574,

ASTM D3363,

ASTM D3273

Storage & Handling

Storage Conditions

• 12 months from date of manufacturing in original unopened containers.
• Store product (10°C - 35°C) for maximum storage life. Higher temperatures reduce normal storage life.
• Lower temperatures may cause increased viscosity of a temporary nature.
• Rotate stock on a “first in-first out” basis.
• Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.

Shelf Life

12 months