Products

H.B. Fuller EA6205 is a one-component, ultraviolet light-curable adhesive designed for LCD terminal pin bonding applications. The cured adhesive exhibits characteristics of high flexibility and toughness, good moisture resistance, and good chemical resistance. The product offers excellent adhesion to glass and is ideal for applications such as flat panel displays (FPD).

H.B. Fuller EA6111 is a fast cure, low-viscosity, UV/moisture double-cure adhesive. This product is a conformal coating material designed for protection from moisture and harsh chemicals. It can be cured in shadowed areas. This product is designed for circuit board protection.

Cilbond® 24 is a one-coat rubber-to-metal adhesive designed for general-purpose elastomers. It provides superior performance compared to standard primer and topcoat solutions. This adhesive offers significant process improvements and delivers long-term end-use performance. One of the key advantages of Cilbond® 24 is its exceptional corrosion protection, which helps enhance the durability and longevity of bonded parts.

H.B. Fuller EA6204 is a one-component, ultraviolet light-curable adhesive designed for LCD end-sealing applications. The cured adhesive exhibits high flexibility and toughness, good moisture resistance, and good chemical resistance. The product offers excellent adhesion to glass and is ideal for applications such as flat panel displays (FPD).

H.B. Fuller 2999 is a single-component, high-viscosity gel cyanoacrylate adhesive. It is ideal for bonding porous materials or for applications where controlling adhesive flow is critical. H.B. Fuller 2999 offers maximum gap filling and repositioning time. It has been certified to ISO 10993-5 for cytotoxicity, making it appropriate for use in medical device applications.

H.B. Fuller 09RC is a high-strength anaerobic adhesive for retaining close-fitted parts, shafts, bushes, pulleys, and rotors. It is especially suitable for use on oily surfaces. It is highly resistant to heat, corrosion, vibrations, water, gasses, oils, hydrocarbons, and many chemicals.

SILAPRENE® North America’s Premier™ Adhesive/Sealant is an exceptional one-part product that combines ease of application, versatility of use, high ultimate strength, permanent bonds and long service life. N.A.P. Adhesive/Sealant is a high-quality, high-solids elastomeric sealant that provides superior adhesion to a variety of surfaces, and its bond strength improves with age.

Flexel™ EM9002 is a heat-activated adhesive film designed to bond plastic substrates such as ABS, PC, pre-treated olefins, textiles, artificial leather, and genuine leather at low temperatures. This adhesive film exhibits high fracture toughness, peel strength, and shear strength while maintaining flexibility. It offers excellent adhesion to plastics and textiles.

SILAPRENE® Royal Seal 1000 Adhesive/Sealant DC13011 is an exceptional one-part product that combines ease of application, versatility of use, high ultimate strength, permanent bonds and long service life. It is a high quality, elastomeric sealant that provides superior adhesion to a variety of surfaces.

H.B. Fuller EA6206 is a one-component, ultraviolet light-curable adhesive designed for LCD terminal pin bonding applications. The cured adhesive exhibits high flexibility and toughness, good moisture resistance, and good chemical resistance. The product offers excellent adhesion to glass and is ideal for applications such as flat panel displays (FPD).

Swift®lock 2U340 is a single-component, fully reactive hot melt adhesive that cross-links through a chemical reaction with moisture found in the surrounding air and substrates, to produce a thermoset adhesive. 2U340 was specifically formulated for difficult to bond plastics, such as ABS and vinyl, to a wide variety of metals. 2U340 was designed to provide a good balance of properties. The rheology of the product gives excellent release from roll coaters and no stringing of adhesive. The open time of three minutes is sufficient for assembly of a wide variety of applications. Green strength development of greater than 50 psi in 15 seconds holds difficult substrates together after combining. Long term aging studies show excellent retention of adhesive properties.

SILAPRENE® M6324 Adhesive/Sealant is an exceptional one-part product that combines ease of application, versatility of use, high ultimate strength, permanent bonds and a long service life. M6341 is a high-quality, high-solids elastomeric sealant that provides superior adhesion to a variety of surfaces, and bond strength improves with age.

GorillaPro® AR200 is a high-strength, anaerobic adhesive designed for retaining close-fitting parts like shafts, bushes, pulleys, and rotors. It is particularly well-suited for use on oily surfaces, eliminating the need for additional cleaning. This formula is recommended for press-fit applications that demand tighter machining tolerances. GorillaPro® AR200 demonstrates exceptional resistance to heat, corrosion, vibrations, water, gasses, oils, hydrocarbons, and various chemicals.

Cilbond® 36 is a one-coat rubber-to-metal bonding solution specifically designed for specialty elastomers, making it ideal for demanding and high-performance applications. It offers extreme corrosion protection and a long open time. Cilbond® 36 serves as a high-performance bonding agent for VMQ (silicone) to substrate, exhibits exceptional temperature performance, and features a one-coat formulation.

Cilbond® 62W is a trusted and high-performance water-based one-coat friction system designed for compounds used in the Friction Industry. It is primarily used in the manufacturing of products like original equipment (OE) and after-market brake pads. It bonds to all metals commonly used in brake pad production, including Zn/Ni coatings.