Products

H.B. Fuller 13180 is a high-performance contact adhesive made from synthetic rubber. This adhesive offers high tack, a long open time, and repositionability. It demonstrates excellent resistance to temperature, humidity, and water. With its versatile properties, it serves as an excellent general-purpose adhesive. It is commonly used for bonding foam, plastics, carpet, fiberglass-reinforced plastic (FRP), wood, various metals, and elastomers.

H.B. Fuller 35RC is a fast-curing, high-strength anaerobic adhesive. It is used for locking and sealing threads and for retaining cylindrical parts. It allows for larger machining tolerances and is highly resistant to heat, corrosion, vibrations, water, gasses, oils, hydrocarbons, and many chemicals.

H.B. Fuller EA6053H is a fast-curing adhesive that utilizes UV light to cure. The product possesses a soft and flexible nature, while also exhibiting excellent adhesion properties. This adhesive can be used as a replacement for silicone rings in buffering applications. It is capable of providing good adhesion to a variety of substrates, including glass, plastics, and metals.

Swift®lock 6864 is a reactive hot melt adhesive specifically designed for laminating challenging substrates such as PTFE membranes and difficult fabrics. It offers excellent bonding performance in these demanding applications. This adhesive is commonly used in the sportswear, contract manufacturing, and workwear industries.

Rakoll® GXL 3 is an easy-to-apply adhesive that is suitable for many processing conditions and provides very strong bonding. As a PVAc adhesive, it meets the requirements of class D3 as a one-component product. When mixed with Rakoll® GXL-3-Härter, it meets the requirements for the D4 standard DIN EN 204.

Rakoll® TPX 1 is a high-performance, water-based adhesive that meets the American National Standards Institute (ANSI) and the Decorative Hardwood Association (formerly HPVA) Type 1 water resistance specifications. It is designed for bonding interior or exterior non-structural wood joints, and has a long open assembly time, low VOC, and water clean up, all in an easy to use single component formulation. H.B. Fuller’s Rakoll® woodworking adhesives, long regarded as the high standard in Europe, have recently been re-launched in North America.

Ultraflex­™ 4320 is a solvent-based adhesive that can be used as a one- or two-component system. It has a high heat activation temperature and offers high green strength, which means it provides strong initial bonding even before full curing. It is designed for sole and upper bonding in the footwear industry. Additionally, it is worth noting that Ultraflex™ 4320 exhibits excellent green strength even when used at a lower concentration than the recommended amount.

Tuskbond NC501 - 500ml Aerosol is a premium non-chlorinated sprayable contact adhesive developed to bond a wide variety of substrates. It has extremely high solids content, greatly reducing the risk of low coat weight. NC501 provides a superior bond, excellent grab, fast drying time and a long open time. This product has high bond strength and high-temperature resistance.

Tuskbond HD20 - 500ml Aerosol is a fast and easy multipurpose spray adhesive that will bond to most substrates. HD20 gives a rapid and strong bonding formation and is economical in use. The adhesive is fast drying with a long open time.

Cyberbond CB805 is a reactive chemistry two-part acrylate adhesive known for its excellent bonding of dissimilar substrates and performance under vibration and impact. It is used in outdoor signs, magnets, electronics, and sporting goods and leisure applications in the general industries market.

Swift®melt 9066 is a pressure-sensitive hot melt adhesive that provides an optimal balance between adhesion and cohesion. It exhibits good aging behavior and has a water-white color. Swift®melt 9066 is suitable for side sealing applications and as a vapor barrier.

Cyberbond CB 2003 is a carefully stabilized, fast-bonding cyanoacrylate for hobby and DIY applications. CB 2003 performs well on many materials, including acidic surfaces such as wood, cardboard, leather, etc. The product has medium viscosity and universal properties. Cyanoacrylates are fast setting, one component and solvent-free adhesives.

Enifix 350 is a high-performance, one-component contact adhesive based on polychloroprene rubber with special tackifiers and additives. It is specially developed to be compatible with most substrates and exhibits excellent film-forming properties, providing uniform bonding to many surfaces.

H.B. Fuller HL7200 is a hot melt adhesive. One notable advantage is its heat stability, which ensures ease of use and consistent performance. This allows for reliable bonding and application processes. H.B. Fuller HL7200 is specifically used for furniture upholstery applications, making it suitable for bonding different materials in the manufacturing of upholstered furniture. While it may also have potential uses in kitchen cabinets and counters, its primary application is in furniture upholstery, where its heat stability contributes to the overall performance and durability of the adhesive bonds.