Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Cure Method
- Curing Conditions
Cure speed will vary with temperature, relative humidity, depth of material and presence of moisture. Some applications may require special surface preparation. At 21 - 25°C, 45 - 55% relative humidity, typical cure depth is 2mm in 24 hours. Requires more time to cure in colder or lower humidity conditions.
- General Instructions
- For best performance bond surfaces should be clean, dry and free of any contaminants and oils.
- Apply a continuous and even bead of silicone to one surface.
- Assemble parts immediately. Remove excess material at once.
Properties
- Color (Properties)
- Physical Form
- Appearance
- Black thixotropic paste
- Electrical Properties
Value Units Test Method / Conditions Volume Resistivity 2.0 x 10¹⁵ Ω.cm GB/T1692 - Technical Data
Value Units Test Method / Conditions Specific Gravity 1.1 - - - Cured Properties
Value Units Test Method / Conditions Hardness 28.0 - GB/T 531, Shore A Tensile Strength (50% RH) 1.5 MPa GB/T 528 Thermal Service Range - 54 - 210 °C - Lap Joint Shear Strength (Aluminum, 50% RH) 1.5 MPa GB/T 7124 Elongation at Break (50% RH) 180.0 % GB/T 528 - Damp Heat Aging Test Properties
Value Units Test Method / Conditions Elongation at Break (at 175ºC, for 168 hr, 50% RH) 180.0 % GB/T 528 Tensile Strength (at 175ºC, 168 h, 50% RH) 1.5 MPa GB/T 528 - Uncured Properties
Value Units Test Method / Conditions Tack Free Time 5 - 30 min - Full Cure Time (21 - 25°C, 45 - 55% RH, min. 2mm) 24.0 h - - Rheological Properties
Value Units Test Method / Conditions Viscosity 40,000 - 70,000 cP -
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Regional Availability
- Packaging Information
- 310 ml Cartridge
- 18.0 kg Pail
Storage & Handling
- Storage Condition
Product shall be ideally store in a cool, dry area in unopened containers. Material should be stored at a temperature of 8 - 25°C. Do not return unused material back into the container.