Products

Tonsan® TS856 is a kind of 2K PU structural adhesive, it is mainly used for composite materials bonding and can be cured at room temperature or can be accelerated with heating, after curing it has excellent adhesion, impact resistance, water resistance, electric isolation, and corrosion resistance properties.

H.B. Fuller HB6300CLR-N is an acrylic waterborne polymer primarily designed as a pressure-sensitive adhesive. This product is formulated in clear and acts as a contact adhesive, especially for strip lash adhesive in H.B. Fuller's product lineup. It aids in preparing the eyelash to adhere to the strip lash adhesive. Suitable substrates for this adhesive include bonding to the eyelash as well as bonding to strip lash adhesive, resulting in a stronger hold.

Swift®lock 2U340 is a single-component, fully reactive hot melt adhesive that cross-links through a chemical reaction with moisture found in the surrounding air and substrates, to produce a thermoset adhesive. 2U340 was specifically formulated for difficult to bond plastics, such as ABS and vinyl, to a wide variety of metals. 2U340 was designed to provide a good balance of properties. The rheology of the product gives excellent release from roll coaters and no stringing of adhesive. The open time of three minutes is sufficient for assembly of a wide variety of applications. Green strength development of greater than 50 psi in 15 seconds holds difficult substrates together after combining. Long term aging studies show excellent retention of adhesive properties.

Foster® 96-04 Butyl Flashing Tape is a pre-formed, double-sided tape that comes in rolls with a release liner. This tape is extruded and non-hardening, consisting of a solvent-free, 100% solids gap-filling sealant with excellent tack. It is designed to create a weather-resistant and watertight seal while providing strong adhesion to various substrates, including metal, wood, glass, rubber, and masonry.

Childers® Chil-Byl® CP-76 Sealant is a well-balanced mixture of butyl polymers tailored for long-lasting flexibility in various insulation applications, including low-temperature, dual-temperature, and high-temperature settings. It is an excellent water seal, vapor seal, and expansion joint material and is suggested as a joint sealant for metal jacketing systems.

H.B. Fuller HL 9597/1 is a polyurethane (PUR) hot-melt adhesive. It is specifically designed for strong adhesion to a wide range of substrates. This adhesive offers high strength and good flexibility, making it suitable for various applications. It provides good mileage compared to EVA spine adhesive. It is commonly used as a spine adhesive for bonding different paper stocks, forming a flexible film. This makes it an ideal choice for graphic arts and bookbinding applications.

Swift®melt Health 1711 pressure-sensitive hot melt adhesive is for manufacturers of EKG electrodes and wound care products who want to adhere to skin.

Swift®melt Health 1711 pressure-sensitive hot melt adhesive provides excellent bonding to skin with great tack while conforming to ISO 10993 biocompatibility standards, including ISO 10993-5, 10993-10I, and 10S, Human Patch Test at 48 and 72 hours.

This allows manufacturers of EKG electrodes and wound care products to access to an adhesive solution for a variety of application opportunities while ensuring the safest solutions for skin with biocompatible regulatory support.

H.B. Fuller EA6035 is a fast UV-cure adhesive. This product is suitable for bonding a wide variety of substrates, including glass, plastic, and metal. The product has shown excellent adhesion and a high degree of flexibility for use in high-stress or mismatched CTE bonding applications.

Childers® Chil-Lag® CP-52 Lagging Adhesive / Coating is a white, water-based formula designed for easy and smooth brushing. It effectively bonds and forms a durable film when used with glass or canvas lagging cloth. When applied over insulation, it acts as a protective coating and helps prevent the release of fibers from bare fibrous insulation.

Masterfix 775 is a one-component contact adhesive based on cross-linked synthetic rubber with special tackifiers and additives. It is specially developed for bonding TPO membranes with various substrates in waterproofing applications. Masterfix 775 features excellent film-forming properties, providing uniform bonding to many surfaces.

Swift®col Health 9248 solvent-based acrylic, the pressure-sensitive adhesive, is for manufacturers of medical products and devices who want to adhere to skin.

Swift®col Health 9248 solvent-based acrylic, pressure-sensitive adhesive provides biocompatible regulatory support, conforming to ISO 10993 biocompatibility standards, including 10993-5 (tests for cytotoxicity) and 10993-10 (tests for skin irritation and sensitization), to ensure the safest solution for consumers skin.

This allows manufacturers of medical products and devices to access sprayable, crystal-clear adhesive solutions that adhere effectively to skin and substrate materials, enabling satisfaction for skin-sensitive consumers.

Swift®Col Health 9248 is suitable for roll coats, while its sprayable properties enhance application options and provide regulatory support.

EternaBond® Acrylic Tape Gray (AT-2) is a pressure-sensitive, gray, foam-core acrylic tape system designed to provide a superior bond between a wide variety of substrates. The tape possesses a uniform, high-tack acrylic adhesive on both surfaces and will bond to most clean, dry, oil-free substrates.

ProSpec® Slab Dowel Grout is a non-shrink, high compressive strength grout, non-metallic, ideal for placing prefabricated concrete pavements and structural grouting applications.

Childers® Chil-Lastic™ CP-79 Sealant and Coating is a versatile, high-temperature sealant and coating applied by trowel over various thermal insulations, except polystyrene. This asphalt-based coating creates a tough, durable, heavy film and can withstand elevated temperatures. Before putting hot lines, vessels, or tanks into operation, they should be cured at ambient temperature with proper ventilation to prevent the potential boiling out of the residual solvent.

SecurePortIV® is the first and only cyanoacrylate adhesive that is FDA-cleared for securement of vascular access devices. It is simple, safe and effective for all patient populations and devices. SecurePortIV® adhesive is improving vascular access outcomes by delivering enhanced securement, sealing the insertion site, and providing microbial protection. SecurePortIV reduces catheter movement, migration and dislodgement. It effectively seals the catheter insertion site and provides a unique defense against catheter-related bloodstream infections. SecurePortIV comes in .15 ml applictors / 50 applicators per box.