Products

Foster® Spark-Fas® Adhesive 85-20™ is a rapid-setting, non-flammable, fire-resistant synthetic elastomer adhesive. It is specifically utilized for bonding duct wrap, fibrous glass, or mineral wool insulations with densities of up to 6 lbs. to galvanized steel and aluminum air conditioning or hot air ducts. This adhesive is chosen when a fire-resistive dry film is necessary. It contains non-flammable chlorinated solvents, eliminating the risk of explosions and fires during the application process.

Swift®lock 2020 is designed to set quickly and strengthen within 3-4 minutes. Fully moisture-cured material displays excellent high temperature strength, tested up to 120°C. Rapid shipment of bonded parts is possible as Swift®lock 2020 will not flow or expel at 120°C, preserving bonded geometry at high temperatures even while still uncured.

H.B. Fuller 2536 is a two-component, room-temperature, fast-bonding silicone system. Its typical applications include glass, metal, and plastic bonding. It provides good long-term adhesion performance in high-temperature conditions. This black RTV-2 silicone is a de-alcoholized silicone with the advantages of fast curing, low odor, no solvent, no corrosion, excellent electric performance, and excellent resistance to all kinds of weather, including UV light, rainwater, hailstone impacting, etc. There is a secondary cure with atmospheric moisture that promotes full cure over 7 days.

H.B. Fuller TS820 is a two-part, 1:1 mix ratio, toughened adhesive with less odor than most acrylic adhesives. TS820 Adhesive has excellent shear and peel strengths along with good impact resistance and durability. TS820 Adhesive quickly bonds most metals and ceramics with minimal surface preparation.

Swift®tak 5161 is a water-based adhesive known for its general-purpose fast-setting performance. It provides a clean application on high-pressure nozzle applicators and is Baumer HHS-approved. It fulfills typical direct food contact requirements and is commonly used in high-pressure, contactless nozzle systems. It is ideal for use on lacquered and OPP-pretreated surfaces in the bag and sack industry.

Advantra® PHC-8280 is a clear, consistent color, hot melt adhesive with excellent thermal stability and increased mileage in hot and cold environments. It is applicable to uncoated to moderately coated corrugated, clay coated, SBS, SUS, and similar materials. The product has a wide service temperature range.

H.B. Fuller 3C3113 is a water-based adhesive known for its excellent adhesion to properly film laminated paperboard. It is specifically designed for bonding difficult surfaces. This adhesive offers fast set speed, excellent adhesion to various substrates, medium open time, and great machine tolerance. It is primarily used as a side seam adhesive for bonding difficult surfaces, particularly in the corrugated industry.

Foster® 40-30™ Fungicidal Protective Coating is a low-odor, fast-setting, water-based surfacing material specifically crafted for field or shop application to faced or unfaced fiberglass duct liner, fiberglass duct board insulation, or galvanized surfaces. This formulation is highly effective at preventing the growth of mold and odor-causing bacteria on its surface for an extended period of time.

Cyberbond CB 2800 is a very fast-setting cyanoacrylate with extremely good properties for bonding rubber (especially EPDM) and plastics with each other or in combination. The aging properties of these joints are outstanding. CB 2800 is a grade with a very low viscosity that shows wicking properties. It is also known as CB 2000 W.

GorillaPro® PU5 is a two-component, beige-colored structural urethane adhesive that sets extremely fast. It is commonly used for repairing and bonding urethane parts, thermoplastics, laminated surfaces, metal, leather, glass, and stone. The adhesive is rigid, impact-resistant, and exhibits good peel and shear strength. GorillaPro® PU5 offers an excellent combination of shear strength, peel strength, and impact resistance. It is conveniently packaged in a DOUBLE/BUBBLE® 3.5 gm packet.

Cyberbond CB 2605 is a carefully stabilized, fast-bonding cyanoacrylate for hobby and DIY applications. CB 2605 performs well on many materials, including acidic surfaces such as wood, cardboard, leather, etc. CB 2605 should be considered the general-purpose product in the Powerdrop® Series. It has fast bonding capabilities and possesses universal properties with a medium viscosity.

H.B. Fuller MP55305 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55305 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. It offers exceptional bonding for a wide range of substrates.

Childers® Fibrous Adhesive CP-97 is a sodium silicate-based adhesive known for its exceptional strength. Notably, it is non-flammable when in a wet state and becomes incombustible once dry. As it ages, it strengthens the bonds it forms, ensuring a secure connection. Additionally, this adhesive provides excellent coverage, making it an economical choice for various applications.

FULLABOND 2403 is an EVA-based adhesive specifically designed for bonding challenging surfaces. This adhesive provides several benefits, including a fast set speed, excellent adhesion to a variety of substrates, a medium open time, and exceptional machine tolerance. FULLABOND 2403 is a reliable choice when it comes to achieving strong and reliable bonds on difficult surfaces.

Cyberbond CB 5600 is a cyanoacrylate with low odor, low blooming (whitening effect), and low outgassing characteristics. These very positive properties are accompanied by lower strength features when compared to cyanoacrylates based on ethyl ester. CB 5600 is a high-viscosity grade with certain gap-filling properties.