Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Benefits
Set Time 3 - 4 minutes - application dependent
Open Time 45 seconds - in bead form
Green Strength Build Excellent Initial Set strength, building 50% of its maximum cured strength within the 3 - 5 minutes after bond.
Excellent Environmental Resistance Cures to form a very strong bond that is resistant to heat, cold, moisture.
Excellent Cold Resistance Adheres to many substrates at temperatures as low as -30ºC without exhibiting any signs of bond failure.
Fogging No visible fogging occurs in cured material
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Cure Method
- Use Precautions
Product is ready-to-use as received; do not dilute hot melt adhesive. Confirm compatibility before making hot melt adhesive changes.
Properties
- Typical Properties
Value Units Test Method / Conditions Viscosity (at 165°C) 16,000 - 19,000 mPa.s - Open Time (in bead form) 45 - 60 s - Green Strength Build (in 5 min) 1.57 MPa - Softening Point (prior to full cure) 165.0 °C - Cure Rate (at 21 - 25°C, 45 - 55% relative humidity, 14 days)* 90.0 % -
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
- Packaging Information
- 55 gallon metal drums
- 5 gallon metal pails
Storage & Handling
- Storage Condition
To ensure maximum stability, product should be stored in the original closed container in an interior location capable of maintaining a constant temperature.