Products

H.B. Fuller PIB969NA is a hot melt adhesive known for its exceptional performance in insulating glass applications. It boasts extremely low moisture vapor and insulating gas transmission rates, ensuring optimal energy efficiency. With its strong adhesion to glass and spacer materials, it provides reliable sealing properties. The adhesive meets the ASTM E2190 and CGSB 12 8 standards, further validating its quality and suitability for the intended purpose.

SILAPRENE® DC12880 is a high-quality, synthetic rubber general-purpose contact adhesive that utilizes a hazardous air pollutant-free solvent system. It can be used for bonding foam, plastics, carpet, FRP, wood, various metals and many elastomers, but is not recommended for highly plasticized materials.

H.B. Fuller M6324 is a high-performance polychloroprene adhesive and sealant offering ultimate strength, permanent bonds, and a long service life. It offers superior adhesion to metals, galvanized metals, wood, particle board, plywood, rubber, concrete, glass, thermoplastics, thermoset plastics, composites, and low-surface-energy substrates, and its bond strength improves with age.

Cilbond® 48 is a clear, single-component bonding agent designed for both cold and hot-cure applications (65-275°F/20-135°C) with castable polyurethane systems and injection-molded thermoplastic polyurethane (TPU) systems on metal and plastic substrates. It provides exceptional corrosion resistance and offers the advantage of fast drying. Cilbond® 48 can be used without the need for a pre-bake process and has been specifically developed for use in dynamic conditions where hydrolytic stability is crucial.

H.B. Fuller HL9679 is a reactive hot-melt adhesive known for its very high initial strength, making it particularly suitable for applications in the Summer. It is commonly used for honeycomb structure assembly, as well as for bonding doors and panels.

H.B. Fuller PN3709N is an acrylic-based coating that is surfactant stabilized. It is specifically designed to provide long-term sealing protection in various applications. This coating is known for its non-yellowing properties and is commonly used in concrete curing coatings, as well as in architectural and specialty coatings.

PVC TrimWelder™ Laminating Grade is a low-viscosity, solvent-free structural adhesive system designed for laminating unmilled PVC sheets and boards. Its lower viscosity provides greater flow-out with less clamping pressure to insure a thin, void-free bond. Cured performance shows excellent adhesion and bond strength in excess of the PVC. This material can withstand thermal cycling and shock loading between dissimilar materials. PVC TrimWelder™ Laminating Grade is ready to handle in 45 minutes and may be cut and machined in 1 hour.

Swift®lock 2020 is designed to set quickly and strengthen within 3-4 minutes. Fully moisture-cured material displays excellent high temperature strength, tested up to 120°C. Rapid shipment of bonded parts is possible as Swift®lock 2020 will not flow or expel at 120°C, preserving bonded geometry at high temperatures even while still uncured.

TEC® Flexera 2K PSA Hybrid stands as an ultra-high-performance, two-part adhesive that is water-based and meticulously crafted for the rigorous installation demands of various sheet flooring types, including homogeneous and heterogeneous sheets, sports flooring, LVT, rubber, and linoleum. This adhesive offers an amalgamation of easy PSA-method installation with the proven durability and robust adhesion akin to epoxy adhesives. Its resistance to rolling and static loads, coupled with its 100% RH capability, positions it as the go-to choice for commercial and institutional flooring. Flexera 2K PSA stands apart from conventional wet-set adhesives by providing an extended pot life, generous open time, and aggressive initial tack for swift flooring installation.

Foster® 40-20C Protective Coating offers a resilient and decorative finish that accommodates movement without creating spaces for bacteria to lodge. This cost-effective coating is resistant to various industrial chemicals and provides long-lasting protection. It is suitable for application on walls, ceilings, pipes, both interior and exterior surfaces of HVAC duct systems, and in areas where effective controls are required.

Apollo Roofing InsuBond Spray-Applied Insulation Adhesive is a spray-applied insulation adhesive featuring a reactive chemistry and moisture-curing polyurethane. It is designed for precise, professional, and quick application through spraying, aiming to minimize project costs. The adhesive allows for controlled application, resulting in a smooth finish. It is suitable for the professional and efficient bonding of a wide range of insulation boards to the AVCL (Air and Vapor Control Layer) or directly to the deck. Additionally, it is an excellent choice for insulation and coverboard adhesives.

H.B. Fuller Isomelt M is a black-colored sealant suitable for windows and glass surfaces in the building and construction industry. It offers heat resistance and is designed for use in building envelope and roofing applications, particularly in EIFS (Exterior Insulation and Finishing Systems) and insulation projects.

Swift®melt 82674 PW is a pressure-sensitive, hot-melt adhesive known for its very high peel strength, which allows it to form permanent bonds. It offers excellent quick-stick properties and high heat resistance. This adhesive is commonly used in industrial assembly applications for bonding materials such as wood, textiles, carpet, foam, vinyl, and certain plastics.

H.B. Fuller 13890 is a water-based adhesive known for its one-component, polychloroprene formulation. It is designed for contact bonding applications and offers excellent high temperature resistance, making it suitable for high pressure lamination processes. The adhesive has a high tack and long open time, allowing sufficient time for bonding. Additionally, its bond strength improves over time.

ST-30 is a flexible butyl joint sealant designed for sealing precast concrete, manholes, septic tanks, box culverts, concrete pipes, vaults, and vertical panels. It is permanently flexible, tacky, moisture-resistant, and durable against acidic and alkaline environments. Not for use in expansion joints or moving joints. Available in various sizes and shapes, it meets or exceeds ASTM C990 standards for butyl tapes.