Products

H.B. Fuller MP5405NS is a two-part unfilled epoxy adhesive that is designed for high-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid material and has a thixotropic paste consistency to prevent running and sagging. This product has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 20 - 30 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

H.B. Fuller MP5405 is a two-part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough, semi-rigid material with a free-flowing viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was especially formulated to have a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. Handling strength is normally achieved at room temperature within 3 - 5 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Full-Care® 5218AZP is for hygiene manufacturers who want to produce baby diapers, femcare products or adult incontinence products with good bonding strength. Full-Care® 5218AZP provides high bio-based contents that allows hygiene manufacturers to achieve overall bio-based content target of the hygiene articles.

H.B. Fuller AT-3 very high-bond strength acrylic tape is a pressure-sensitive, structural-grade, solid acrylic tape system. It is designed to provide a superior bond between a wide variety of substrates. The tape possesses a uniform, high-tack acrylic adhesive on both surfaces with an integral core of solid acrylic polymer that will bond to most clean, dry, oil-free substrates.

H.B. Fuller FH8800 is a fast-curing, single-component epoxy adhesive that exhibits excellent adhesion to various materials. It is designed for optically clear bonding or LED die attachment and serves as a potting material. The adhesive can be cured rapidly at 100˚C.

PVC TrimWelder™ Laminating Grade is a low-viscosity, solvent-free structural adhesive system designed for laminating unmilled PVC sheets and boards. Its lower viscosity provides greater flow-out with less clamping pressure to insure a thin, void-free bond. Cured performance shows excellent adhesion and bond strength in excess of the PVC. This material can withstand thermal cycling and shock loading between dissimilar materials. PVC TrimWelder™ Laminating Grade is ready to handle in 45 minutes and may be cut and machined in 1 hour.

H.B. Fuller FH8301 is a single-component, heat-curable epoxy underfill encapsulant designed for flip-chip applications such as system-in-package and modules. It is designed for high adhesion and reliability. FH8301 is formulated to flow consistently without voids on die sizes up to 12 x 12 mm. This material can also improve the reliability of chip scale packages (CSP) and ball grid array (BGA) package assemblies.

H.B. Fuller MP5430 is a two-part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough, semi-rigid material with a free-flowing viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 volume mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 20 - 30 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

H.B. Fuller EA6042 is a high-performance, fluorescence, fast UV-cure adhesive and encapsulant. This product has a tack-free surface finish and good electrical insulation performance. It has excellent precision dispensing and jetting performance. This product is suitable for bonding a wide variety of substrates, including glass, many plastics, and most metals. It has excellent adhesion and is flexible.

PVC TrimWelder™ White Hot™ is a solvent based adhesive designed specifically for use in joining PVC (Poly Vinyl Chloride) plastic to itself. PVC TrimWelder™ White Hot™ is a fast acting, high strength adhesive. It is a solvated system with tetrahydrofuran, cyclohexanone and methyl ethyl ketone.

H.B. Fuller MP5405FLEXMV is a two-part unfilled rubber modified medium viscosity epoxy adhesive designed for high-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid material that is free-flowing in viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 20 - 30 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.