Products

Cool Cover™ TPO Edge Sealant is a high-solids, low-VOC, elastomer-based white edge sealant designed to seal the exposed edges of TPO membrane splices and laps. The sealant has excellent adhesion to TPO membranes as well as various other substrates, including EPDM, metal, wood, and concrete. The sealant can be used on TPO as well as EPDM roofing systems. Cool Cover™ TPO Edge Sealant is suitable for use in VOC-regulated markets such as California and the O.T.C. States.

Foster® Elastolar® Sealant 95-44 is a flexible, fire-resistant sealant formulated with butyl elastomer. This vapor barrier sealant is intended for sealing joints in insulation (excluding polystyrene foam), metal, and masonry applications where maintaining a water-tight and air-tight seal is essential. It is suitable for use as a joint sealant in low-velocity duct air-conditioning systems and is particularly effective in sealing the laps of metal jacketing to prevent moisture ingress.

ElastiSeal® 6098 is a non-flowing sealant that is designed to waterproof and prevent corrosion in spot weld assemblies. This sealant permits welding with conventional spot welders. It prevents moisture and oxygen from entering the joint and provides corrosion protection to the area that cannot be coated with primer. The sealant disappears from the area of the weld but retains a tight seal around the weld spot. The weld strengths are unchanged by the use of ElastiSeal® 6098.

ElastiSeal® R-900 is uniquely formulated one-part, ready-to-use butyl adhesive/sealant which has excellent resistance to environmental temperature extremes and acid/alkaline conditions. ElastiSeal® R-900 forms a permanent flexible bond to a wide variety of substrates including brick, concrete, metals and plastics. It skins over rapidly through solvent release and cures to a tape-like consistency. This adhesive/sealant should not be used with polycarbonates.

ElastiSeal® BP-300 is a non-skinning, non-hardening, permanently flexible gun-grade compound. It maintains a positive airtight seal by remaining both permanently adhesive and flexible to all of the substrates that it is applied to. This non-skinning sealant does not accept paint.

ElastiSeal® B-100 Butyl Rubber Sealant is a single component, solvent release butyl based sealant specifically designed to provide excellent exterior weathering properties. It is easy to apply and tool and exhibits superior adhesion to a variety of clean surfaces. ElastiSeal® B-100 Butyl Rubber Sealant is an excellent choice for exterior sealing applications and is compat- ible with an array of substrates such as glass, metals, concrete, wood, masonry and some plastics.

H.B. Fuller EV Seal 200 is an MS polymer system that can be used for 1K moisture curing or a 2K accelerated cure option. Fast skin-over and green strength at room temperature. The product shows superb mechanical properties and provides unparalleled levels of sealing and resistance. Suitable for adhesion to a wide range of substrates like plastics, metals, and composite materials.