Products

Advantra® PHC-9254 is a superior, wide-range-grade case and carton hot melt adhesive with great performance at both low and high temperatures. An outstanding troubleshooting grade It ensures superior bonding, thermal stability, clean machining, and a low total cost of ownership. Even at extremely low temperatures, this hot melt adhesive offers the sealing advantage your business needs.

TEC® Premium Wall and Cove Base Adhesive TA-714W is a ready-to-use adhesive designed for masonry applications. It is compatible with various substrates and surfaces, including vinyl, elastomers, rubbers, gypsum, plasters, concrete, and plywood. This adhesive is notable for its excellent water resistance, low VOC content, outstanding stain resistance, freeze/thaw stability, and low odor.

Full-Care® 6888AZP is a highly reliable hot melt adhesive renowned for its exceptional oil resistance performance. It is meticulously formulated to cater to the specific needs of breathable film applications, making it an ideal choice for manufacturing feminine care products and for precise positioning requirements.

Magik 8110 is a UL Classified, premium quality, single-component, synthetic rubber-based adhesive with special additives and tackifiers. It is a rapid-setting synthetic elastomer adhesive designed for use with fibrous glass insulation, duct wrap, and acoustical linings for air handling units.

H.B. Fuller EV Bond 420 is a high-performance, two-part acrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. EV Bond 420 greatly increases the reliability of finished assemblies, its ability to withstand extreme temperature fluctuations, and its resistance to a wide range of chemicals and environmental conditions. EV Bond 420GB allows control of the adhesive gap to a diameter of 0.25mm (0.01").

Full-Care® 5585 is a generation of olefin-based hot melt adhesive designed specifically for construction applications. This adhesive offers a low odor, a light color, and good bond strength. It provides robust performance on a wide variety of substrates commonly used in construction projects. Full-Care® 5585 is widely used in the production of disposable baby diapers, adult incontinence products, feminine care items, and in the construction industry.

Full-Care® 9710 is a low odor hot-melt adhesive designed for stretch engine systems. Its low set value allows for faster processing and improved productivity. The adhesive is primarily used in specialty applications where stretch lamination is required, providing secure bonding and tension control.

Masterfix 820 is a two-component, solvent-free, insulating polyurethane adhesive. It is moisture and weather-resistant, suitable for both indoor and outdoor applications. The two-part system consists of Part A, a thixotropic paste, and Part B, a cross-linking hardener. When mixed, they form a uniform cream-colored paste that is easy to apply using a brush or roller.

Cyberbond CB 1603 is a cyanoacrylate with extremely good properties for bonding rubber (especially EPDM) and plastics with each other or in combination. The aging properties of these joints are outstanding. The high viscosity allows certain gap-filling properties. It is fast-bonding and has a very high viscosity along with good aging properties.

H.B. Fuller 1536 is a gray, flowable, one-component, neutral alkoxy-cure silicone sealant. Low-odor, solvent-free materials cure at room temperature when exposed to moisture in the atmosphere. With fast tacky-free time and meets the UL94-V0 flame rating. Excellent adhesion to glass, ABS, FR4, and PCBs. Superior resistance to thermal cycling, damp heat, and damp freezing Typical applications include electronics encapsulation, connector staking, electronics potting, circuit board encapsulation, electrical component reinforcement, electronic component bonding, and sealing.

Swift®therm 2290-X is a low VOC and low odor hot melt adhesive. It is specifically designed for vacuum lamination applications in automotive interiors. This ready-to-use product provides a strong bond while emitting minimal odor. It falls under the category of hot-melt reactive adhesives and is available in the Asia Pacific region.

Full-Care® 9300 is a high-quality hot melt adhesive known for its resistance to humidity. It features a distinct color change after exposure to moisture and offers washout resistance. With its low odor formulation, it ensures a pleasant user experience. This versatile adhesive finds applications in the hygiene industry, specifically for adult incontinence and disposable baby diapers. It is also suitable for specialty applications in hygiene construction.

Full-Care® 5617 is the latest generation of olefin-based hot melt adhesive, specifically designed for construction applications. It offers the lowest odor among the product range and higher peel values, which can enable lower add-ons. This adhesive is widely used in the production of disposable baby diapers, adult incontinence products, feminine care items, and in the construction industry.

H.B. Fuller EU2002HV is a solvent-based adhesive with excellent mechanical and chemical resistance. However, one distinguishing characteristic of EU2002HV is its high viscosity. H.B. Fuller EU2002HV is primarily used for conformal coating applications, providing a protective layer on circuit boards. The low odor feature enhances the user experience by minimizing any unpleasant smells during the application process.

Full-Care® 5607 is a hot-melt adhesive. One of the notable advantages of Full-Care® 5607 is its extremely low odor and color. This is particularly important in construction applications, where maintaining a clean and esthetically pleasing appearance is crucial. In addition, Full-Care® 5607 offers high peel performance even at low coat weights.