Magik 8110

Identification

Chemical Family

Synthetic Rubbers

GBU

BAS

RTU Product Type

Insulation Adhesive,

Solventborne Adhesive,

Elastomeric Adhesive

Categories

Markets → Automotive & Transportation → Applications → Automotive → Cooling & Climate

Markets → Industrial → Applications → Chemical & Industrial Manufacturing → Equipment & Parts

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Solvent-Based Nonreactive Adhesives

Applications

Application Area

HVAC Ducts,

Air Conditioners

Application Method

Brush,

Roller

Compatible Substrates & Surfaces

Glass

Applications & Uses

Application Procedure

The surface should be structurally sound, clean, dry, leveled and free from dust, curing compounds, grease and other loose debris. Keep container closed when not in use.

Apply MAGIK 81-10 with brush, roller or pressure feeding equipment evenly on both surfaces and wait until solvent is fully evaporated. After the evaporation of solvent in adhesive, assemble the surface by applying normal hand pressure.

In case of fibrous wool, apply MAGIK 81-10 evenly by brush, roller or any suitable equipment over the GI sheet and wait for 5 to10 minutes before bonding the glass wool.

Product Applications

MAGIK 81-10 is recommended in applications where fibrous glass and other type of insulation are bonded to the interior or exterior of metal air conditioning ducting systems.

Features

Ready-to-Use Product Features

Chemical Resistant,

Good Bonding Strength,

Good Weather Fastness,

Heat Resistance,

Low Odor,

UL Flame Rated,

Peel Resistance,

Solvent-Based,

High Coverage

Features & Benefits

Labeling Claims

Lead-free,

Asbestos-free,

Non-Flammable,

Mercury-free

Product Features

• Zero Flame spread and Smoke developed
• Excellent Bonding and Peel Off Strength
• Excellent Open Time and Wet Tack
• High Compatibility with Insulation Fiber & Fabric
• Excellent Bonding to Porous & Non-Porous Surfaces
• Excellent Coverage
• Weather Resistant
• Fire Resistant (when dry)
• Low Odor
• Chemical Resistant

Packaging & Availability

Packaging Type

Pails

Regional Availability

• India/MiddleEast/Africa (IMEA)

Packaging Information

5 USG Metal Pail

Physical Properties

Physical Form

Liquid

Appearance

Green Liquid

Properties

Specifications

	Value	Units	Test Method / Conditions
Coverage Range (for a wet film thickness of 0.1 - 0.2 mm)	4.8 - 9.8	m²/L	-
Density	0.65 - 0.85	kg/L	ASTM D 1475-98
Drying Time (complete bond)	30	minutes	ASTM D 1640
Drying Time (set to touch)	10	minutes	ASTM D 1640
Service Temperature	- 30 to 95	°C	-
Solid Content	27 - 33	%	ASTM D 1644
Storage Temperature	10 - 35	°C	-
Viscosity	300 - 900	cPs	ASTM D 2196

Appearance

Green liquid

Regulatory & Compliance

Quality Standards

NFPA 90A,

MIL-A-3316C,

ASTM C916 Type IV,

NFPA 90B 25/50

Storage & Handling

Storage Conditions

• 12 months from date of manufacturing in original unopened containers.
• Store product (10°C - 35°C) for maximum storage life.
• Higher temperatures reduce normal storage life.
• Lower temperatures may cause increased viscosity of a temporary nature.
• Rotate stock on a “first in-first out” basis.
• Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.

Shelf Life

12 months

Thermal Properties

Flame Rating

UL 723