Products

H.B. Fuller RP30 is a low-viscosity, rapid-curing cyanoacrylate adhesive for general-purpose bonding. This product is designed to bond a wide range of similar and dissimilar materials. Its handling strength in most applications is 5 to 10 seconds. This product can be post-applied.

H.B. Fuller SC1546 is a versatile, fast-drying, brush-grade adhesive that forms tough, flexible bonds resistant to moisture, aging, aliphatic solvents, and oils. It is designed to bond a wide variety of materials, such as wood, leather, PVC, ABS, polystyrene, steel, and aluminum.

H.B. Fuller SI1500 is a surface-insensitive cyanoacrylate adhesive that is used in applications that require faster cure speeds on parts that are dry and on parts that may be acidic. The SI series bonds a wide range of similar and dissimilar surfaces. This series provides exceptional performance in a wide range of applications.

H.B. Fuller UR 3543 A-E + UR 3543 BTF-E is a two-component polyurethane adhesive with excellent adhesion to wet and dry reverse osmosis membranes, as well as excellent resistance to acidic and basic solutions. It is typically used as an adhesive for osmosis filter bonding and potting applications.

H.B. Fuller 09RC is a high-strength anaerobic adhesive for retaining close-fitted parts, shafts, bushes, pulleys, and rotors. It is especially suitable for use on oily surfaces. It is highly resistant to heat, corrosion, vibrations, water, gasses, oils, hydrocarbons, and many chemicals.

H.B. Fuller EV Therm 440 is a modified, highly engineered structural acrylic adhesive designed to provide excellent thermal conductivity while maintaining superior strength and performance properties across a wide range of temperatures and substrates. EV Therm 440 is an excellent flame retardant with a UL94 V0 rating. EV Therm 440GB allows control of the adhesive gap to a diameter of 0.25mm (0.01").

H.B. Fuller 42223/52223 (DOUBLE/BUBBLE® A-85) urethane purple is a medium-hardness, highly flexible, two-component polyurethane system designed for use as an adhesive. It is used in casting and coating applications requiring rapid curing, high flexibility, high resilience, transparency, and resistance to breakdown or yellowing from exposure to UV light. H.B. Fuller 42223/52223 is nearly impervious to water exposure during the curing process, yet bonded substrates should be reasonably water-free before application. It exhibits high resistance to aqueous materials after cure. This product is suitable for sealing and bonding flexible substrates such as flexible conveyor belts, printing press rollers, rubberized fabrics, shoes, ski boots, and other sports equipment. It is also excellent for bonding refrigeration and AC equipment.

H.B. Fuller 48173/58173 is an extra-fast setting, two-component, room temperature-curing epoxy adhesive. This system will cure at as low as -18°C (0°F). It has a convenient mix ratio, excellent cohesive strength, and bonds to most substrates, including concrete, ceramics, metals, carbon steel, stainless steel, aluminum, plastics, epoxy, stone, wood, glass, china, and leather. It is recommended for fast patching, fixturing, and other repairs requiring quick handling strength. Two slower-setting versions of this system are also available, which include 58185, which sets in approximately 10 minutes, and 58269, which sets in approximately 20 minutes. This extra-fast-setting epoxy is an excellent general-purpose adhesive. H.B. Fuller 48173/58173 is available in the unique DOUBLE/BUBBLE® job-sized package as Reorder No. 04001.

H.B. Fuller MP54190 is a two-part mineral-filled epoxy adhesive for bonding metals and plastics. It cures at room temperature to a semi-flexible material with good wetting properties for self-leveling and air release. It provides excellent vibration and impact resistance and good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. With a 1:1 volume mix ratio, it's suitable for use with dispensing cartridges and metering, mixing, and dispensing equipment. At room temperature, the adhesive reaches a handle cure within 16–24 hours, but heat can accelerate curing, with typical times and temperatures ranging from 2 hours at 65°C to 20 minutes at 100°C. Work and cure times will increase at cooler temperatures.

H.B. Fuller TS4000 is a highly engineered, rubber-toughened cyanoacrylate adhesive. This product is elastomer modified to provide excellent impact resistance, thermocycling properties, and heat aging properties. H.B. Fuller TS4000 is ideal for bonding dissimilar surfaces that are exposed to high and low temperatures. It has high-end temperature resistance up to 250°F.

H.B. Fuller UR4515GF is a two-component polyurethane adhesive specifically designed for the structural bonding of metals and plastics. This product offers high lap shear strength, good thixotropy for easy application, and a good work life. It has a 1:1 mix ratio by volume and is designed for easy use with automated dispense systems.

H.B. Fuller 20RC is an anaerobic resin. It is the best method for retaining, locking, and sealing a wide range of metal parts. Even in the tightest fitting assemblies, voids are present, which allows for movement and potential loosening of the parts. H.B. Fuller 20RC is a tough, durable resin that fills all these voids, creating a unitized assembly that is completely resistant to shock, vibration, and extremely harsh environmental conditions. These materials cure in the absence of air and in the presence of metal. They are ideally suited for retaining cylindrical assemblies and providing shock and vibration resistance.

H.B. Fuller 4189-3 energy-absorbing sound damping pad is a combination of energy-absorbing mastic material and an aluminum top layer that provides maximum sound damping. Extension and compression of the mastic damping material converts vibratory energy into heat, thus reducing the noise level of the damped substrate. The aluminum top layer maximizes this effect by redirecting any escaping vibratory energy back into the mastic layer.

H.B. Fuller 4193HD pressure-sensitive mastic patch is usually laminated to a plastic film or foil to facilitate installation. It can be die-cut into simple or complex shapes as required by the application. When the appropriate film or foil is used, this material can be applied before paint with no negative impact during bake cycles.

H.B. Fuller® V 6080 AR NEW is a water-based adhesive developed based on vinyl emulsions, tackifying resins and plasticizers. This adhesive is characterized by its excellent performance in tube assembly.