H.B. Fuller logo

H.B. Fuller SI1500

H.B. Fuller SI1500 is a surface-insensitive cyanoacrylate adhesive that is used in applications that require faster cure speeds on parts that are dry and on parts that may be acidic. The SI series bonds a wide range of similar and dissimilar surfaces. This series provides exceptional performance in a wide range of applications.

Product Type: 1K (1 component) Adhesive

Application Area: Appliances

Compatible Substrates & Surfaces: Acrylonitrile Butadiene Styrene (ABS), Aluminum, Fiberglass, Leather, Metal, Neoprene, Phenolics, Plastics, Polycarbonate (PC), Polyvinyl Chloride (PVC), Steel, Wood

Chemical Family: Cyanoacrylates

Features: Fast Curing, High Viscosity

Technical Data Sheet
View All Documents

Enhanced TDS

Identification & Functionality

Chemical Family
Cyanoacrylates
Product Type
1K (1 component) Adhesive
Technologies
Adhesives & Sealants
Product Families
Adhesives & Sealants — Bonding Technology
1K Liquid Reactive Adhesives

Features & Benefits

Ready-to-Use Product Features
Fast Curing,
High Viscosity

Applications & Uses

Markets
Consumer Goods
Applications
Consumer Goods — Appliances & Electronics
Application Area
Appliances
Compatible Substrates & Surfaces
Acrylonitrile Butadiene Styrene (ABS),
Aluminum,
Fiberglass,
Leather,
Metal,
Neoprene,
Phenolics,
Plastics,
Polycarbonate (PC),
Polyvinyl Chloride (PVC),
Steel,
Wood
Cure Method
Moisture Cure
General Instructions
  • For optimum results parts should be clean and free from any contamination on the bonding surface. If parts do not mate flush together use a higher viscosity product to compensate for the gap.
  • Factors Affecting Cure Speed Include: GAP: Thin bond line results in faster cure speed. Larger gaps will lengthen cure speed. HUMIDITY: Cure and fixture times can be influenced by the humidity conditions at the time of assembly.
  • The higher the RH the faster cure and fixture times will be. Fixture time data based on our testing is conducted at 50% relative humidity.

Properties

Color (Properties)
Transparent
Physical Form
Liquid
Appearance
Clear viscous liquid
Cured Properties
ValueUnitsTest Method / Conditions
Shear Strength (Steel)min. 2100psiISO 4587
Shear Strength (Aluminum)min. 1750psiISO 4587
Shear Strength (Neoprene)min. 750psiISO 4587
Shear Strength (Acrylonitrile Butadiene Styrene)min. 900psiISO 4587
Shear Strength (Polyvinyl Chloride)min. 900psiISO 4587
Shear Strength (Polycarbonate)min. 900psiISO 4587
Shear Strength (Phenolic)min. 850psiISO 4587
Tensile Strengthmin. 1800psiISO 6922
Damp Heat Aging (Strength on PC after 500 hrs, at 40°C, 95% RH)100.0%-
Dielectric Constant (at 1kHz)2 - 3.5-ASTM D150
Dissipation Factor (at 1kHz)max. 0.02-ASTM D150
Volume Resistivity(2 - 10) x 10¹⁵Ω.cmASTM D257
Uncured Properties
ValueUnitsTest Method / Conditions
Viscosity1500.0cP-
Specific Gravity1.06--
Set Time (Steel)max. 10s-
Set Time (Aluminum)max. 10s-
Set Time (Neoprene)max. 5s-
Set Time (Acrylonitrile Butadiene Styrene)max. 10s-
Set Time (Polyvinyl Chloride)max. 10s-
Set Time (Polycarbonate)max. 10s-
Set Time (Phenolic)max. 10s-

Packaging & Availability

Regional Availability
  • North America

Storage & Handling

Storage Conditions
  • Store product in unopened containers, out of direct sunlight, in a dry location.
  • Material should be stored at or below 22°C.
  • For extended shelf life unopened containers of the product may be refrigerated.