Adhesives & Sealants

H.B. Fuller 6070 is a liquid primer specifically designed to enhance the strength of the adhesive when working with low surface tension substrates. By applying this primer, the adhesive's bonding performance is improved, ensuring a reliable and durable bond. H.B. Fuller 6070 is primarily used as a primer in appliance applications, where low-surface-tension substrates are commonly encountered.

H.B. Fuller GM 40 is an anaerobic adhesive with reactive chemistry. It is a high-viscosity, red anaerobic flange sealant and gasket maker. It offers good temperature stability and is resistant to shock and vibration. It is used for sealing close-fitting joints between rigid metal flange assemblies, such as pumps, gearboxes, camshafts, engine blocks, and motor flanges, in flange and gasket sealant applications.

H.B. Fuller TS820 is a two-part, 1:1 mix ratio, toughened adhesive with less odor than most acrylic adhesives. TS820 Adhesive has excellent shear and peel strengths along with good impact resistance and durability. TS820 Adhesive quickly bonds most metals and ceramics with minimal surface preparation.

H.B. Fuller FH8014 is a reworkable, single-component epoxy underfill for fine-pitch chip scale packaging (CSP) and wafer-level packaging (WLCSP) assembly. It is heat curable and designed to improve reliability, with a fast cure time at a moderate temperature to minimize stress on components. This underfill is also reworkable without causing damage to the attach pad.

H.B. Fuller FH8710 is a one-component epoxy adhesive that has excellent toughness and bonding strength. This halogen-free structural bonding adhesive has good mechanical properties and reliability properties. It has a very high bonding strength to multiple materials, especially inorganic materials.

H.B. Fuller PHOTOCAP® 6048 is a thermoplastic, non-EVA-based encapsulating film designed for use in thin film modules.  It has a low MVTR (moisture vapor transmission rate), a short lamination cycle, and good creep resistance with proven longevity in the field.

H.B. Fuller EA6039 is a reactive acrylic adhesive that bonds a wide variety of substrates, including glass, numerous plastics, and most metals. This product has demonstrated remarkable adhesion and flexibility. It is a non-sag, high-strength, and highly flexible adhesive that can be dispensed and jetted at high speeds. It finds application in stacking and corner bonding of electronic components, as well as bonding glass, plastics, and various metals. Additionally, it is commonly used in electric motors.

H.B. Fuller EA6405 is a one-component adhesive that can be cured by UV irradiation followed by thermal cure. It has fast UV curing and low-temperature heat curing with outstanding bond strength to PC substrates. This material is designed for structural bonding and has superior adhesion to a wide range of substrates, including plastics and metals such as PC, PMMA, aluminum, stainless steel, and other polar substrates.

H.B. Fuller TS880 is a two-part adhesive (10:1 ratio by volume), which can bond many low-surface-energy plastics without special surface preparation, including many grades of polypropylene, polyethylene, TPO, etc. TS880 can replace screws, rivets, plastic welding, and two-step processes that include chemical etchants, priming, or surface treatments in many applications. Typical applications include bonding plastics, metals, glass, and rubbers.

H.B. Fuller EA6202 is a fast UV-cured adhesive with medium viscosity. It is a general-purpose, one-component adhesive with good gap flow. This product is suitable for bonding a wide variety of substrates, including glass, many plastics, and most metals. H.B. Fuller EA6202 has shown excellent adhesion and is flexible.

H.B. Fuller HM3700149 is a one-component reactive hot-melt adhesive known for its economical nature. It offers longer green strength development, which provides flexibility in the headlamp assembly process. Additionally, it demonstrates excellent thermal stability during the manufacturing process. It is commonly used for bonding headlamp lenses and housings in the exterior lighting industry.

H.B. Fuller Red Gel is a high-strength, single-component, anaerobic threadlocking adhesive gel. Red Gel Threadlocker prevents the loosening of threaded fasteners. It is suitable for applications where disassembly with hand tools is required for servicing. Its innovative pump design improves dispensing ease and accuracy while also limiting cleanup.

H.B. Fuller NP2075VF149 is a reactive hot melt adhesive known for its high performance and high green strength. As a one-component adhesive, it enables efficient manufacturing processes with high speed and low work-in-progress (WIP). It demonstrates excellent thermal stability during the production phase and boasts industry-leading heat resistance when exposed to in-lamp heat. This adhesive is primarily used for headlamp lens and housing bonding and exterior lighting applications.

H.B. Fuller MP54190 is a two-part mineral-filled epoxy adhesive for bonding metals and plastics. It cures at room temperature to a semi-flexible material with good wetting properties for self-leveling and air release. It provides excellent vibration and impact resistance and good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. With a 1:1 volume mix ratio, it's suitable for use with dispensing cartridges and metering, mixing, and dispensing equipment. At room temperature, the adhesive reaches a handle cure within 16–24 hours, but heat can accelerate curing, with typical times and temperatures ranging from 2 hours at 65°C to 20 minutes at 100°C. Work and cure times will increase at cooler temperatures.

H.B. Fuller FH8620 is a one-component, low-temperature curing epoxy adhesive. This material features fast curing at low temperatures, low shrinkage, high adhesive strength, and adhesion to a variety of substrates. FH8620 will cure faster at an increased temperature. It also exhibits high and low temperature resistance.