Products

Millennium LPS is a single component, elastomeric polyurethane, multi-use, sealant that is isocyanate free. Millennium LPS cures rapidly under the effect of atmospheric air and moisture to form a flexible and resistant joint with very good adhesion to most materials.

Körapur® 140 is a single-component, elastic, moisture-curing polyurethane adhesive used for bonding and sealing primered and varnished metals, aluminum, wooden materials, and duroplastics. This high-strength, elastic adhesive has excellent properties such as high cold resistance, high heat resistance, excellent moisture resistance, and excellent weather resistance.

Körapop 954 Marine is a one-component elastic adhesive and sealant that utilizes silane-modified polymer chemistry. This product is specifically designed for marine applications and is characterized by its high strength and non-sag properties. Körapop 954 Marine offers high flexibility and provides high adhesion to many substrates without requiring primers. Additionally, this product boasts exceptional resistance to UV, weather, and aging.

Körapur® 125 is a multi-purpose, one-component, non-sag, elastic polyurethane adhesive and sealant. It has good resistance to humidity and weathering and is both paintable and suitable for use with foodstuffs. Additionally, it exhibits good adhesion to a wide range of substrates.

Körapur® 128 S is an elastic one-component adhesive and sealant used for bonding in the manufacturing of containers, vehicles, vehicle bodywork, air conditioning and heating equipment, metalwork, and other applications. It exhibits good adhesion to primed and painted metals, aluminum and steel, wood, and duroplastics. It also offers good resistance to humidity and weathering.

H.B. Fuller EH9672 is a fast-setting, reactive hot melt adhesive and sealant. It is a 100% solid, one-component material with a secondary moisture cure system. This material is applied warm and sets immediately, allowing handling without the need for heat curing. It has optimum adhesion to a wide range of substrates, including aluminum, stainless steel, and especially common engineered plastics such as polycarbonate, ABS, and nylon. H.B. Fuller EH9672 may also be easily reworked by heating the bonded assembly to 80 - 90°C, allowing damage-free disassembly. The cured product can then be easily removed, leaving minimal residue.

Körapur® 940 Marine is a one-component, moisture-curing adhesive and sealant that is elastic and suitable for use in the marine and boat industry. The product exhibits good adhesion to primed and painted metals, aluminum, wood, duroplastics, GRP, and gel coat. It also offers good resistance to humidity and weathering.

ElastiSeal® B-100 Butyl Rubber Sealant is a single component, solvent release butyl based sealant specifically designed to provide excellent exterior weathering properties. It is easy to apply and tool and exhibits superior adhesion to a variety of clean surfaces. ElastiSeal® B-100 Butyl Rubber Sealant is an excellent choice for exterior sealing applications and is compat- ible with an array of substrates such as glass, metals, concrete, wood, masonry and some plastics.

H.B. Fuller HAPs Free Sealant (12781) is a one-part, block co-polymer, solvent-release adhesive and sealant with high ultimate strength and permanent bonds. It is sag-resistant, easy to apply, and provides a long service life. It is suitable for bonding and sealing metals, galvanized metals, wood, particle board, plywood, rubber, concrete, glass, thermoplastics, thermoset plastics, composites, and substrates with low surface energy.

Tonsan® 1533 Black is a two-component adhesive that can cure quickly at room temperature, providing excellent sealing and bonding. This material is recommended for potting electronic components, typically for the junction box on PV modules. It has excellent dielectric properties and V1 flame retardancy.

Childers® Chil-Lastic™ CP-79 Sealant and Coating is a versatile, high-temperature sealant and coating applied by trowel over various thermal insulations, except polystyrene. This asphalt-based coating creates a tough, durable, heavy film and can withstand elevated temperatures. Before putting hot lines, vessels, or tanks into operation, they should be cured at ambient temperature with proper ventilation to prevent the potential boiling out of the residual solvent.

H.B. Fuller EH9641 is a fast-setting reactive hot melt adhesive and sealant. It is a 100% solid, one-component material with a secondary moisture cure system. This material is applied warm and sets immediately, allowing handling without the need for heat curing. H.B. Fuller EH9641 has optimum adhesion to a wide range of substrates, including glass, aluminum, stainless steel, and common engineered plastics such as polycarbonate.

H.B. Fuller STP 1921 Modified Silane Sealant is a high-quality, neutral, elastic single-component adhesive/sealant based on silane-terminated polymer, which cures by reaction with moisture to an elastic product. The skin formation and curing time are dependent on humidity and temperature, and the curing time also depends on joint depth. By increasing the temperature and moisture, these times can be reduced; low temperatures as well as low moisture retard the process.