Products

H.B. Fuller U3320 is a one-component, low-viscosity, UV-curable structural adhesive with excellent bonding characteristics on various plastics, especially PET/PETG and polycarbonate. The thin viscosity of U3320 makes it ideal for use in wicking applications, particularly on components with close-fitting tolerances.

H.B. Fuller MP54420 is a two-part epoxy hybrid adhesive designed for bonding metals and plastics with quick curing at room temperature to a tough, semi-rigid material. It features controlled flow characteristics that provide good wetting without excessive running or dripping, as well as excellent vibration and impact resistance. The product also resists water spray, inorganic acids and bases, and most organic solvents. The recommended 2A:1B volume mix ratio is ideal for use in side-by-side dispensing cartridges and metering, mixing, and dispensing equipment. At room temperature, MP54420 reaches a handle cure within 6–12 hours, but cure time can be accelerated with heat. It's worth noting that cooler temperatures increase work and cure times, and substrate heat-up time should be taken into account.

H.B. Fuller U3342 is a medium-viscosity UV-curable adhesive material designed to bond well on a wide variety of plastics, glass, and ceramics. It is particularly effective on PMMA and polycarbonate and offers some impact resistance on similar or dissimilar substrates.

H.B. Fuller TS880 is a two-part adhesive (10:1 ratio by volume), which can bond many low-surface-energy plastics without special surface preparation, including many grades of polypropylene, polyethylene, TPO, etc. TS880 can replace screws, rivets, plastic welding, and two-step processes that include chemical etchants, priming, or surface treatments in many applications. Typical applications include bonding plastics, metals, glass, and rubbers.

H.B. Fuller MP5430NS is a two-part modified epoxy adhesive designed for medium-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid polymer and is delivered in a non-sagging viscosity. It provides good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 40 - 50 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

H.B. Fuller 45036/56666 (DOUBLE/BUBBLE® D-85) urethane blue is a rigid, two-component, extra-fast-setting polyurethane structural adhesive. It displays an excellent combination of shear and peel strength with good impact resistance. It is highly recommended for bonding engineering thermoplastics, SMC, laminated surfaces, and the repair of reaction injection-molded parts. H.B. Fuller 45036/56666 is recommended for substrates such as metal, carbon steel, stainless steel, aluminum, tin, plastic, epoxy, polyester, phenolic, urethane, stone, glass, ceramic, and leather. This product can be used to repair urethane parts and is recommended for the repair of rubber hoses and flexible electrical connections. H.B. Fuller 45036/56666 is available in the unique DOUBLE/BUBBLE® job-sized package as Reorder No. 04023.

H.B. Fuller MP54110 is a two-part unfilled epoxy adhesive designed for bonding of metals, ceramics, and most plastics. This product gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. This product has better water and temperature resistance than standard 5-minute epoxy. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 30 - 60 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

H.B. Fuller UR4515GF is a two-component polyurethane adhesive specifically designed for the structural bonding of metals and plastics. This product offers high lap shear strength, good thixotropy for easy application, and a good work life. It has a 1:1 mix ratio by volume and is designed for easy use with automated dispense systems.

H.B. Fuller MP54190 is a two-part mineral-filled epoxy adhesive for bonding metals and plastics. It cures at room temperature to a semi-flexible material with good wetting properties for self-leveling and air release. It provides excellent vibration and impact resistance and good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. With a 1:1 volume mix ratio, it's suitable for use with dispensing cartridges and metering, mixing, and dispensing equipment. At room temperature, the adhesive reaches a handle cure within 16–24 hours, but heat can accelerate curing, with typical times and temperatures ranging from 2 hours at 65°C to 20 minutes at 100°C. Work and cure times will increase at cooler temperatures.

H.B. Fuller MP55300 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55300 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. It offers exceptional bonding for a wide range of substrates.

H.B. Fuller MP5401 is a one-component, heat-curable, thixotropic epoxy paste adhesive. It is a non-sag adhesive that forms strong bonds to metals and ceramics. H.B. Fuller MP5401 has exceptional thermal stability and resistance to water, humidity, and solvents. This product offers high heat resistance and cures in less than 36 seconds via induction or infrared heating. Its typical uses include permanent magnet motors and loudspeaker assembly, air conditioning joint tubes and processors, high-temperature structural bonding, filter end caps, and side seam assembly.

H.B. Fuller MP5405NS is a two-part unfilled epoxy adhesive that is designed for high-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid material and has a thixotropic paste consistency to prevent running and sagging. This product has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 20 - 30 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

H.B. Fuller TS820 is a two-part, 1:1 mix ratio, toughened adhesive with less odor than most acrylic adhesives. TS820 Adhesive has excellent shear and peel strengths along with good impact resistance and durability. TS820 Adhesive quickly bonds most metals and ceramics with minimal surface preparation.

H.B. Fuller U3345 is a versatile, medium-to-high viscosity, UV-curable adhesive that bonds extremely well to a wide variety of substrates. It is suitable for use in a broad spectrum of UV-cure applications, where it provides a tough, flexible bond on plastic, glass, and metal.

H.B. Fuller MP5430 is a two-part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough, semi-rigid material with a free-flowing viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 volume mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 20 - 30 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.