Products

H.B. Fuller MP5430NS is a two-part modified epoxy adhesive designed for medium-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid polymer and is delivered in a non-sagging viscosity. It provides good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 40 - 50 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

H.B. Fuller MP54420 is a two-part epoxy hybrid adhesive designed for bonding metals and plastics with quick curing at room temperature to a tough, semi-rigid material. It features controlled flow characteristics that provide good wetting without excessive running or dripping, as well as excellent vibration and impact resistance. The product also resists water spray, inorganic acids and bases, and most organic solvents. The recommended 2A:1B volume mix ratio is ideal for use in side-by-side dispensing cartridges and metering, mixing, and dispensing equipment. At room temperature, MP54420 reaches a handle cure within 6–12 hours, but cure time can be accelerated with heat. It's worth noting that cooler temperatures increase work and cure times, and substrate heat-up time should be taken into account.

H.B. Fuller 45036/56666 (DOUBLE/BUBBLE® D-85) urethane blue is a rigid, two-component, extra-fast-setting polyurethane structural adhesive. It displays an excellent combination of shear and peel strength with good impact resistance. It is highly recommended for bonding engineering thermoplastics, SMC, laminated surfaces, and the repair of reaction injection-molded parts. H.B. Fuller 45036/56666 is recommended for substrates such as metal, carbon steel, stainless steel, aluminum, tin, plastic, epoxy, polyester, phenolic, urethane, stone, glass, ceramic, and leather. This product can be used to repair urethane parts and is recommended for the repair of rubber hoses and flexible electrical connections. H.B. Fuller 45036/56666 is available in the unique DOUBLE/BUBBLE® job-sized package as Reorder No. 04023.

H.B. Fuller U3320 is a one-component, low-viscosity, UV-curable structural adhesive with excellent bonding characteristics on various plastics, especially PET/PETG and polycarbonate. The thin viscosity of U3320 makes it ideal for use in wicking applications, particularly on components with close-fitting tolerances.

H.B. Fuller U3342 is a medium-viscosity UV-curable adhesive material designed to bond well on a wide variety of plastics, glass, and ceramics. It is particularly effective on PMMA and polycarbonate and offers some impact resistance on similar or dissimilar substrates.

H.B. Fuller 1521 is a two-component, room-temperature-cure silicone system. It has very low ionic content and can be used for electronic component applications and electronics potting. Its applications include appliance sealing, connector sealing, and junction box potting. Additionally, it has good thermal conductivity and flame retardancy.

H.B. Fuller MP54110 is a two-part unfilled epoxy adhesive designed for bonding of metals, ceramics, and most plastics. This product gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. This product has better water and temperature resistance than standard 5-minute epoxy. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 30 - 60 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

H.B. Fuller TS880 is a two-part adhesive (10:1 ratio by volume), which can bond many low-surface-energy plastics without special surface preparation, including many grades of polypropylene, polyethylene, TPO, etc. TS880 can replace screws, rivets, plastic welding, and two-step processes that include chemical etchants, priming, or surface treatments in many applications. Typical applications include bonding plastics, metals, glass, and rubbers.

Foster® Bridging Encapsulant 32-32 is a single-component, water-based elastomeric product with pigmentation. It is designed for interior use over asbestos-containing materials (ACM) of fibrous and cementitious types. This product can be easily applied via spray, and once cured, it forms a resilient, durable elastomeric film over the ACM. This film effectively delays the release of friable asbestos fibers.

H.B. Fuller UR4515GF is a two-component polyurethane adhesive specifically designed for the structural bonding of metals and plastics. This product offers high lap shear strength, good thixotropy for easy application, and a good work life. It has a 1:1 mix ratio by volume and is designed for easy use with automated dispense systems.

H.B. Fuller FH7012S is a TCA (thermally conducting adhesive) acrylate. This adhesive is designed for applications that require thermal conductivity, such as heat sink attachments. It offers the benefit of thermal conductivity, which helps in efficiently transferring heat away from sensitive components. The adhesive is commonly used in the assembly of portable devices, where effective heat dissipation is crucial for maintaining optimal performance and preventing overheating. H.B. Fuller FH7012S provides reliable bonding and effective thermal management, ensuring the proper functioning of portable devices under demanding conditions.

H.B. Fuller MP54190 is a two-part mineral-filled epoxy adhesive for bonding metals and plastics. It cures at room temperature to a semi-flexible material with good wetting properties for self-leveling and air release. It provides excellent vibration and impact resistance and good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. With a 1:1 volume mix ratio, it's suitable for use with dispensing cartridges and metering, mixing, and dispensing equipment. At room temperature, the adhesive reaches a handle cure within 16–24 hours, but heat can accelerate curing, with typical times and temperatures ranging from 2 hours at 65°C to 20 minutes at 100°C. Work and cure times will increase at cooler temperatures.

H.B. Fuller MP55300 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55300 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. It offers exceptional bonding for a wide range of substrates.

H.B. Fuller TS820 is a two-part, 1:1 mix ratio, toughened adhesive with less odor than most acrylic adhesives. TS820 Adhesive has excellent shear and peel strengths along with good impact resistance and durability. TS820 Adhesive quickly bonds most metals and ceramics with minimal surface preparation.

H.B. Fuller FH8801C is a fast-curing, single-component, electrically conductive adhesive designed for chip bonding in microelectronic, MEMS, and opto-electronic applications. This heat-curable material offers outstanding bond strength and snap cure during in-line production, making it ideal for automated assembly processes.