Products

Millennium Hurricane Force® Universal Sealer Extreme is a fast-setting, solvent-free, multi-use universal sealer that becomes waterproof within minutes of application. The formula is essentially VOC-free, making it approved for use in regulated markets such as California and OTC states. Millennium Hurricane Force® Universal Sealer Extreme is a two-component product that cures via a chemical cross-linking mechanism. Unlike one-part moisture-cure sealants, Universal Sealer Extreme will cure consistently and quickly throughout, rather than simply skinning over and remaining tacky on the inside.

H.B. Fuller 71TL is a high-strength, red anaerobic adhesive for locking and sealing of studs, nuts, bolts, and threaded fasteners that does not require dismantling. It is highly resistant to heat, corrosion, vibrations, water, gasses, oils, hydrocarbons, and many chemicals. Permanent adhesion may require heat to disassemble. It has a lower viscosity for improved coverage of smaller threaded areas.

H.B. Fuller 62TL is a medium viscosity, red anaerobic adhesive for thread locking of large diameter studs, nuts, and bolts of all types that does not require dismantling. It is highly resistant to heat, corrosion, vibrations, water, gasses, oils, hydrocarbons, and many chemicals. Permanent adhesion may require heat to disassemble. It has a higher viscosity for improved coverage of larger threaded areas.

Cilbond® 24 is a one-coat rubber-to-metal adhesive designed for general-purpose elastomers. It provides superior performance compared to standard primer and topcoat solutions. This adhesive offers significant process improvements and delivers long-term end-use performance. One of the key advantages of Cilbond® 24 is its exceptional corrosion protection, which helps enhance the durability and longevity of bonded parts.

H.B. Fuller 80RC is a fast-curing, high-strength anaerobic adhesive. It is used for locking and sealing threads and for retaining cylindrical parts. It allows for larger machining tolerances and is highly resistant to heat, corrosion,vibrations, water, gasses, oils, hydrocarbons, and many chemicals.

H.B. Fuller 90TL has low viscosity and provides high capillary action for locking and sealing threaded fasteners and close-fitting parts after assembly. Additionally, it is also used to penetrate and seal metal porosity in molds and incastings. It provides medium- to high-strength locking and is highly resistant to heat, corrosion, vibrations, water, gasses, oils, hydrocarbons, and many chemicals.

H.B. Fuller EX9801 is a two-component epoxy adhesive with reactive chemistry. It is known for its strong bonding strength, excellent water resistance, and corrosion resistance properties. This adhesive is commonly used for bonding composite materials, assembling wood angles, and in the manufacturing of window frames and fenestration products.

H.B. Fuller 40RC is a fast-curing, high-strength anaerobic adhesive. This green anaerobic retaining compound is used for locking and sealing threads and for retaining cylindrical components. It is highly resistant to heat, corrosion, vibrations, water, gasses, oils, hydrocarbons,and many chemicals.

Tonsan® AT 2641 is a 2K PU structural adhesive designed for composite materials bonding. It cures at room temperature or can be accelerated with heating, resulting in excellent adhesion, impact resistance, water resistance, electrical isolation, and corrosion resistance upon curing.

H.B. Fuller 09RC is a high-strength anaerobic adhesive for retaining close-fitted parts, shafts, bushes, pulleys, and rotors. It is especially suitable for use on oily surfaces. It is highly resistant to heat, corrosion, vibrations, water, gasses, oils, hydrocarbons, and many chemicals.

GorillaPro® AT150 is recommended for use as an anaerobic-cure adhesive. It effectively prevents threaded fasteners from loosening due to shock or vibration. GorillaPro® AT150 also provides protection against rust and corrosion between fastener threads, especially after assembly in high humidity or water contact conditions. It is suitable for applications that involve high levels of shock and vibration, offering reliable performance in harsh environments.

Tonsan® TS856 is a kind of 2K PU structural adhesive, it is mainly used for composite materials bonding and can be cured at room temperature or can be accelerated with heating, after curing it has excellent adhesion, impact resistance, water resistance, electric isolation, and corrosion resistance properties.

H.B. Fuller 22TL is a thixotropic anaerobic compound made of Polyacrylate that is specifically designed to cure rapidly and consistently on most fasteners in their original condition. These compounds offer dependable lubrication during assembly and can also act as a threadlocking adhesive and sealant.

Cilbond® 36 is a one-coat rubber-to-metal bonding solution specifically designed for specialty elastomers, making it ideal for demanding and high-performance applications. It offers extreme corrosion protection and a long open time. Cilbond® 36 serves as a high-performance bonding agent for VMQ (silicone) to substrate, exhibits exceptional temperature performance, and features a one-coat formulation.

H.B. Fuller 42TL is a thixotropic, anaerobic, blue threadlocker adhesive. It is formulated to cure rapidly and reliably on most "as received" fasteners. It gives predictable lubricity on assembly and is suitable for applications where disassembly with hand tools is required. It also prevents fasteners from loosening. Its typical applications include locking and sealing hydraulic line fittings, vacuum cleaner bell housing screws, hydraulic piston nuts, rocker nuts, oil pressure switch assembly, construction equipment bolts, bulldozer track bolts, railroad bolts on wear plates, carburetor adjusting screws, and machinery keys.