Products

H.B. Fuller EA6206 is a one-component, ultraviolet light-curable adhesive designed for LCD terminal pin bonding applications. The cured adhesive exhibits high flexibility and toughness, good moisture resistance, and good chemical resistance. The product offers excellent adhesion to glass and is ideal for applications such as flat panel displays (FPD).

H.B. Fuller RP100 is a one-component, medium-viscosity, rapid-curing cyanoacrylate adhesive. It is designed to bond a wide range of similar and dissimilar materials effectively. With a fast handling strength of approximately 10 seconds, it provides quick results and is suitable for general-purpose bonding applications.

Adecol® C-360/5 adhesive is a copolymer that is based on vinyl / ethylene acetate in an aqueous dispersion, modified with special additives. It is a high-performance adhesive with a quick dry, fast tack performance and strong adhesion and cohesion, even in substrates with low superficial tension.

H.B. Fuller MP5430 is a two-part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough, semi-rigid material with a free-flowing viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 volume mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 20 - 30 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

TICTAK® 621 is a double-sided PE-foam tape consisting of a highly conformable closed cell PE foam backing and a high-quality acrylic adhesive. It is designed for frame mounting and is resistant to aging, UV, weathering, water, and salt according to solar requirements.

H.B. Fuller FH1007 is a modified silicone. This adhesive is known for its fast curing speed, making it suitable for assembly applications where efficiency and productivity are important. It offers the advantage of rapid bonding, allowing for faster production processes. One of the key benefits of H.B. Fuller FH1007 is its versatility in bonding different substrates, including metal, glass, and most plastics. The adhesive's moisture-curing properties make it well-suited for applications requiring moisture resistance. It can effectively bond substrates in environments with varying levels of moisture.

Foster® Weatherite™ Mastic 36-10 is a water-based weather barrier mastic suitable for various applications over most thermal insulations, including polystyrene. This mastic offers excellent brush, trowel, and spray properties, is non-flammable when wet, and has a mild odor during application.

Swift®tak 9965 is a water-based synthetic resin known for its excellent water and heat resistance. It offers reliable bond performance across a broad temperature range and meets the ANSI/HPVA EF 2012 standard. This adhesive is specifically designed for engineered wood flooring manufacturing and is well-suited for bonding engineered wood flooring and parquet.

Clarity® PHL 4170 delivers excellent bonding results, featuring a light color and flexibility ideal for PET bottles. Its strong adhesion on hot, cold, and wet containers ensures reliability for container labeling applications. Clarity adhesives offer superior performance, providing significant consumption savings and operational efficiencies.

H.B. Fuller M6197 is a water-based, one-component acrylic emulsion pressure-sensitive adhesive. It offers exceptional peel strength and resistance to creep, making it highly reliable. This adhesive is resistant to plastizer migration and provides good resistance to oils, solvents, and water. It is ideal for various tape and foam pressure-sensitive bonding applications, including foam, sponge, vinyl film, glass, painted surfaces, fabric, wood, leather, thermoplastics, thermoset plastics, EPDM, rubbers, and composites.

Cyberbond CB 2600 is a surface-insensitive cyanoacrylate. This product performs very well on most materials, including acidic surfaces such as wood, leather, cardboard, paper, etc. CB 2600 is a very low-viscosity product with very fast bonding and wicking properties. Cyanoacrylates are fast setting, one component and solvent-free adhesives. They are based on esters of cyanoacetic acid.

H.B. Fuller FH8014 is a reworkable, single-component epoxy underfill for fine-pitch chip scale packaging (CSP) and wafer-level packaging (WLCSP) assembly. It is heat curable and designed to improve reliability, with a fast cure time at a moderate temperature to minimize stress on components. This underfill is also reworkable without causing damage to the attach pad.

Adecol® C-19 adhesive is a polyvinyl acetate homopolymer in aqueous dispersion, modified with special additives. The Adecol® C-19 adhesive performs well in adhesion, cohesion and machinability. The product is reactivated by moisture. It is intended for ironing seals and envelope closure and can be applied by automatic machines.

Swift®therm 2103NA is a longer open time hot melt adhesive developed for industrial assembly and automotive interior applications. It will adhere to a variety of substrates, such as plastics, ABS, EPDM, wires, carpets, wood, aluminum, PP, fiberboard, Lignotock, and Fibrit, and is great for bonding blocked textile into PP and ABS.

Cilbond® 49SF is a single-component bonding agent specifically designed for hot-cure applications (more than 160°F/70°C) with castable polyurethane elastomers and injection-molded TPU systems. It features a pigmented red color and is widely recognized as the industry benchmark for high-performance urethane bonding. Cilbond® 49SF has been developed to bond effectively with various materials, including metals, polyesters, polyamides, epoxies, and fiberglass reinforced plastics. It is highly recommended by leading urethane manufacturers and offers impressive in-service heat resistance of up to 265°F/130˚C (or up to 350°F/180˚C when used in combination with the Cilcure® B additive).