Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Cure Method
- General Instructions
- For optimum results parts should be clean and free from any contamination on the bonding surface. If parts do not mate flush together use a higher viscosity product to compensate for the gap.
- Factors Affecting Cure Speed Include: GAP: Thin bond line results in faster cure speed. Larger gaps will lengthen cure speed. HUMIDITY: Cure and fixture times can be influenced by the humidity conditions at the time of assembly.
- The higher the RH the faster cure and fixture times will be. Fixture time data based on our testing is conducted at 50% relative humidity.
Properties
- Color (Properties)
- Physical Form
- Appearance
- Clear liquid
- Cured Properties
Value Units Test Method / Conditions Shear Strength (Steel) min. 2100 psi ISO 4587 Shear Strength (Aluminum) min. 1750 psi ISO 4587 Shear Strength (Neoprene) min. 750 psi ISO 4587 Shear Strength (Acrylonitrile Butadiene Styrene) min. 900 psi ISO 4587 Shear Strength (Polyvinyl Chloride) min. 900 psi ISO 4587 Shear Strength (Polycarbonate) min. 900 psi ISO 4587 Shear Strength (Phenolic) min. 850 psi ISO 4587 Tensile Strength min. 1800 psi ISO 6922 Damp Heat Aging (Strength on PC after 500 hrs, at 40°C, 95% RH) 100.0 % - Dielectric Constant (at 1kHz) 2 - 3.5 - ASTM D150 Dissipation Factor (at 1kHz) max. 0.02 - ASTM D150 Volume Resistivity (2 - 10) x 10¹⁵ Ω.cm ASTM D257 - Uncured Properties
Value Units Test Method / Conditions Viscosity 100.0 cP - Specific Gravity 1.05 - - Set Time (Steel) 20.0 s - Set Time (Aluminum) max. 15 s - Set Time (Neoprene) max. 5 s - Set Time (Acrylonitrile Butadiene Styrene) max. 10 s - Set Time (Polyvinyl Chloride) max. 5 s - Set Time (Polycarbonate) max. 30 s - Set Time (Phenolic) max. 10 s -
Storage & Handling
- Storage Conditions
- Store product in unopened containers, out of direct sunlight, in a dry location.
- Material should be stored at or below 22°C.
- For extended shelf life unopened containers of the product may be refrigerated.