Products

Automotive & Transportation

Browse Applications

Automotive

381 Products in Automotive & Transportation

SDSWith SDS

TDSWith TDS

H.B. Fuller MP5430NS

Chemical Family:Epoxy & Epoxy Derivatives
Product Type:Reactive Adhesive, Epoxy Adhesive, 2K (2 component) Adhesive, Structural Adhesive
Compatible Substrates & Surfaces:Plastics, Ceramic, Metal
Features:Electrical Insulation Properties, Water Resistant, Good Toughness, Room Temperature Curing, Solvent Resistance, Good Sagging Resistance, Excellent Salt Spray Resistance, Free Flowing, Good Adhesion

H.B. Fuller MP5430NS is a two-part modified epoxy adhesive designed for medium-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid polymer and is delivered in a non-sagging viscosity. It provides good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 40 - 50 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

H.B. Fuller BCF-1

Product Type:Tape
Application Area:Truck Window, Truck Bodies, Bus Body, Truck
Compatible Substrates & Surfaces:Polyvinyl Chloride (PVC)
Features:Excellent Sealing Capability, High Dust Control, Excellent Moisture Resistance, Water Resistant, Good Weather Stability, Corrosion Resistant

H.B. Fuller BCF-1 is a butyl tape that is pressure-sensitive and has butyl-coated foam. It adheres aggressively to most substrates and easily conforms to irregular contours. It offers excellent weatherability and has a highly compressible PVC foam core encapsulated with high-tack butyl adhesive and sealant. It is commonly used as a sealant against moisture and dust elements for various applications, including bus and truck bodies, windows, and as a compliant sealant to protect against water penetration and prevent corrosion and moisture damage in sealant tapes and patches.

EternaBond® Acrylic Tape Translucent (AT-3)

Product Type:Double Sided Tape, Tape
Application Area:Bus, Window Muntin Bar, Fasteners, Recreational Vehicles, Truck, Appliances, Signage, Mechanical Welds, Furniture, Automotive Interior Trim
Features:Good Bonding Strength, Flexible, Waterproofing, Good Weather Stability, Brittle Resistant, Translucent, Long Shelf Life, Excellent Substrate Adhesion, High Moisture Resistance, Hardening Resistant, Tacky, Good Adhesion

EternaBond® Acrylic Tape Translucent (AT-3) is a pressure-sensitive, structural-grade, solid acrylic tape system designed to provide a superior bond between a wide variety of substrates. The tape possesses a uniform, high-tack, acrylic adhesive on both surfaces with an integral core of solid acrylic polymer and will bond to most clean, dry, oil-free substrates.

H.B. Fuller EV Therm 440 GB

Product Type:Reactive Adhesive, 2K (2 component) Adhesive, Structural Adhesive
Application Area:Electric Vehicle (EV), Batteries
Compatible Substrates & Surfaces:Coated Surfaces, Metal, Epoxies, Acrylonitrile Butadiene Styrene (ABS), Fiberglass, RIM Urethane, Acrylic, Polycarbonate (PC), Plastics, Gelcoat, Phenolics, Stainless Steel, Aluminum, Polyurethane
Cure Method:Air Dry
Chemical Family:Acrylics & Acrylates

H.B. Fuller EV Therm 440 GB is a modified, highly engineered structural acrylic adhesive designed to provide excellent thermal conductivity while maintaining superior strength and performance properties across a wide range of temperatures and substrates. EV Therm 440 is an excellent flame retardant with a UL94 V0 rating. It allows control of the adhesive gap to a diameter of 0.25mm (0.01").

H.B. Fuller EV Bond 705

Application Method:Extrusion, Spray, Slot-Die, Roller, Bead
Compatible Substrates & Surfaces:Film, Nylon, Metal, Polyethylene Terephthalate (PET), Glass
Features:Light Weight, Excellent Multi-Substrate Adhesion, Good Adhesion, Low Viscosity

H.B. Fuller EV Bond 705 is a low viscosity non-reactive hot melt pressure sensitive adhesive (PSA) with aggressive tack and good adhesion to various substrates. Its Low viscosity allows for precise application at a wide range of production speeds in EV pouch cell battery bonding or as a process aid in EV Battery construction.

FulaFlex™ 650FC

Application Method:Nozzle
Compatible Substrates & Surfaces:Galvanized Steel, Aluminum, Cement Sheeting, Wood, Masonry, Steel, Engineering Plastics, Polystyrene (PS), Concrete, Acrylic Sheet, Coated Metal, Metal, Plasterboard, Anodized Aluminum, Glass-reinforced Plastic (GRP), Acrylonitrile Butadiene Styrene (ABS), Ceramic, Glass, Plastics, Timber
Features:Anti-Pick, Good Bonding Strength, Cleaner Resistant, High Modulus, Lime Resistance, Shock Resistant, Fast Curing, Excellent Primerless Adhesion, Impact Resistance, Good Toughness, Sound Damping, Good Color Stability, Vibration Proof, Diluted Alkali Resistant, Flexible, Water Resistant, Excellent Multi-Substrate Adhesion, Dynamic Stress Resistance, Mold Resistance, Chemical Resistant, Mechanical Stress Resistance, Weather Resistance, No Bubble Formation, Overpaintable, No Shrinkage, Good Weather Stability, Vibration Damping, Good Sagging Resistance, Excellent Elasticity

FulaFlex™ 650FC is a high-performance, 1-part hybrid moisture-curing sealant and adhesive that forms a tough, elastic, and weatherproof seal. It’s a mid-high modulus product suitable for trafficable areas like concrete saw cuts in commercial buildings and various bonding applications.

H.B. Fuller EV Bond 383

Product Type:2K (2 component) Adhesive, Structural Adhesive, Epoxy Adhesive
Application Area:Electric Vehicle (EV), Batteries, Battery Packs
Compatible Substrates & Surfaces:Composites, Aluminum, Steel, Metal
Chemical Family:Epoxy & Epoxy Derivatives
Features:Good Elongation, Good Bonding Strength, Thixotropic, Bright Fluorescence, Heat Resistance, Long Open Time, High Impact Resistance, Peel Resistance, Toughened, Ambient Curing

H.B. Fuller EV Bond 383 is a thixotropic, toughened, two-component, ambient-curing epoxy adhesive. High impact resistance, moderate cure speeds, and good peel resistance characteristics make this system suitable for assembly or sealing of reinforced composite structures, metal bonding, or other applications where a toughened epoxy adhesive is required. This system contains dyes that fluoresce brightly with exposure to UV inspection lamps (black light).

H.B. Fuller EV Protect 1000

Product Type:Waterborne Coating, 1K (1 component) Coating, Intumescent Coating, Thermal Barrier Coating
Features:Good Sagging Resistance, Thermally Insulating, Anti Dripping, Encapsulated, Excellent Substrate Adhesion, High Viscosity, Excellent Multi-Substrate Adhesion, Ease Of Use, Water-based, Light Weight, Ease of Handling, Flame Resistant, Room Temperature Curing
Application Area:Batteries, Battery Packs, Electric Vehicle (EV), Electric Vehicle (EV) Batteries
Compatible Substrates & Surfaces:Acrylonitrile Butadiene Styrene (ABS), Coated Surfaces, Steel, Wet Film, E-Coated Surfaces, Aluminum, Metal
Application Method:Roller, Spray, Brush

H.B. Fuller EV Protect 1000 is a sprayable water-based intumescent coating designed to add a layer of protection in case of a thermal event in a battery pack. When exposed to flames, the coating will create an insulative layer that prevents direct contact of the flames to the substrate’s surface. This layer provides insulation against the flames and helps slow heat transfer through the coated substrate. H.B. Fuller EV Protect 1000 is formulated to adhere to a variety of common battery pack substrates, including steel, aluminum, e-coat, and ABS plastic. This coating can be easily applied onto battery pack components, and wet film builds of 0.030" can be applied without runs, drips, or sagging.

H.B. Fuller MP5430

Chemical Family:Epoxy & Epoxy Derivatives
Product Type:Reactive Adhesive, Epoxy Adhesive, 2K (2 component) Adhesive, Structural Adhesive
Compatible Substrates & Surfaces:Plastics, Ceramic, Metal
Features:Water Resistant, Good Toughness, Room Temperature Curing, Good Mechanical Properties, Solvent Resistance, Good Sagging Resistance, Excellent Salt Spray Resistance, Free Flowing, Good Adhesion

H.B. Fuller MP5430 is a two-part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough, semi-rigid material with a free-flowing viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 volume mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 20 - 30 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

H.B. Fuller 1510

Product Type:Anaerobic Sealant, Anaerobic Adhesive
Application Area:Flanges
Features:High Temperature Resistance, Chemical Resistant

H.B. Fuller 1510 is an anaerobic flange sealant known for its excellent resistance to high temperatures and chemicals. It is specifically designed for sealing rigid flanges in various applications. This product is commonly used in powertrain systems for rigid flange sealing. Its reliable performance makes it a preferred choice for ensuring effective sealing properties in demanding environments.

H.B. Fuller 7155-3

Product Type:Sealer, Heat Expandable Sealant, Tape, Foam Sealer
Application Area:Metal Parts
Compatible Substrates & Surfaces:Metal, Steel
Features:Medium Strength, Easy To Apply, Heat Expandable, Die Cuttable, Excellent Sealing Capability, Sound Damping, Vibration Damping, Good Gap Filling Capabilities, Good Adhesion

H.B. Fuller 7155-3 heat-expandable sealer is a die-cut, rubber-based sealer that expands with the application of heat to form a flexible, closed-cell foam. It has excellent adhesion to galvanized and primed steel and is recommended for use between metal components to create a watertight seal.

H.B. Fuller MP5405FLEXMV

Chemical Family:Epoxy & Epoxy Derivatives
Product Type:Reactive Adhesive, Epoxy Adhesive, 2K (2 component) Adhesive, Structural Adhesive
Compatible Substrates & Surfaces:Elastomers & Rubbers, Composites, Plastics, Ceramic, Glass, Metal, Wood
Features:Medium Viscosity, Good Toughness, Room Temperature Curing, Solvent Resistance, Excellent Salt Spray Resistance, Free Flowing, Good Adhesion

H.B. Fuller MP5405FLEXMV is a two-part unfilled rubber modified medium viscosity epoxy adhesive designed for high-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid material that is free-flowing in viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 20 - 30 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

H.B. Fuller NP2075VF149

Chemical Family:Polyurethanes (PU)
Product Type:Hot Melt Adhesive, 1K (1 component) Adhesive, Reactive Adhesive
Application Area:Automotive Lighting
Features:High Performance, Heat Resistance, Excellent Performance, Good Thermal Stability, Good Green Strength

H.B. Fuller NP2075VF149 is a reactive hot melt adhesive known for its high performance and high green strength. As a one-component adhesive, it enables efficient manufacturing processes with high speed and low work-in-progress (WIP). It demonstrates excellent thermal stability during the production phase and boasts industry-leading heat resistance when exposed to in-lamp heat. This adhesive is primarily used for headlamp lens and housing bonding and exterior lighting applications.

Royal Sealants WS-8035 Class B

Product Type:Sealant
Application Area:Aerospace Applications
Features:Rapid Curing Speed

Royal Sealants WS-8035 Class B is a rapid-cure and lightweight polysulfide sealant specifically formulated for fuel tank sealing applications in the space exploration industry. Its fast curing properties and low weight make it an ideal choice for ensuring secure and reliable seals in the demanding environment of space exploration.

Tuskbond Infusion 701 - 500ml Aerosol

Product Type:Adhesive
Application Area:Resin Transfer Molding (RTM)
Compatible Substrates & Surfaces:Glass-reinforced Plastic (GRP), Fibre-reinforced Plastic (FRP)
Application Method:Spray
Features:Good Bonding Strength, Fast Drying

Tuskbond Infusion 701 - 500ml Aerosol Infusion Adhesive is a specially developed spray adhesive designed to hold reinforcing fibres in place during the infusion process of Resin Transfer Moulding. Tuskbond Infusion 701 - 22L Canister RTM Infusion Adhesive is a specially developed spray adhesive designed to hold reinforcing fibres in place during the infusion process of Resin Transfer Moulding. The super-fast drying time ensures that layers can be built up with minimal time waiting for the adhesive to dry. Tuskbond Infusion 701s unique pebble spray technology covers areas fast and provides a flat bonding surface in seconds.

Show

of 381 results