Childers

Childers® AK-Cryl™ CP-9 Weather Barrier Coating is a polymeric, water-based, breather-type mastic designed for weather protection. It also offers defense against mechanical damage caused by external forces like impact and abrasion as well as internal forces such as thermal expansion, contraction, or vibration when used in conjunction with a reinforcing membrane. This product can additionally safeguard insulation from chemical attacks by acids, alkalis, and solvents. This coating is fire-resistant and UV-stable.

Childers® Chil-Stix® CP-85 Adhesive is a fast-drying, rubber-based adhesive known for its rapid initial grab and permanent flexibility. It is typically applied using a brush or roller and is commonly used as a flexible blanket adhesive for insulation ducts, where it is applied to metal surfaces and the insulation is set into it.

Childers® Chil-Stix® FRN CP-82 Adhesive is a neoprene-based contact adhesive known for its exceptional bond strength. It is non-flammable when wet and meets the performance standards of Military Specification MIL-A-3316C, Class 2, Grade A. This adhesive is ideal for adhering to many types of insulations such as fibrous glass, laminated scrims, foils, many plastic films, and various foams, both flexible and rigid.

Childers® Chil-Lastic™ CP-79 Sealant and Coating is a versatile, high-temperature sealant and coating applied by trowel over various thermal insulations, except polystyrene. This asphalt-based coating creates a tough, durable, heavy film and can withstand elevated temperatures. Before putting hot lines, vessels, or tanks into operation, they should be cured at ambient temperature with proper ventilation to prevent the potential boiling out of the residual solvent.

Childers® Chil-Byl® CP-76 Sealant is a well-balanced mixture of butyl polymers tailored for long-lasting flexibility in various insulation applications, including low-temperature, dual-temperature, and high-temperature settings. It is an excellent water seal, vapor seal, and expansion joint material and is suggested as a joint sealant for metal jacketing systems.

Childers® Chil-Joint® CP-70 Sealant is a cost-effective joint sealant designed for use in various insulation systems, including low-temperature, dual-temperature, and some high-temperature applications. This sealant is non-shrinking and non-drying, ensuring long-lasting performance. It is also available in caulking tubes for application with hand or power caulking guns.

Childers® Chil-Lag® CP-52 Lagging Adhesive / Coating is a white, water-based formula designed for easy and smooth brushing. It effectively bonds and forms a durable film when used with glass or canvas lagging cloth. When applied over insulation, it acts as a protective coating and helps prevent the release of fibers from bare fibrous insulation.

Childers® Encacel® V CP-45 Vapor Retarder Coating is an elastomeric, polymer-based coating specifically formulated for vapor retardation and weatherproofing. It is designed to protect various types of insulation, including sprayed, board, and block insulation. ENCACEL® V CP-45 is known for its exceptional adhesive qualities, outstanding flexibility, and superior vapor retarder properties.

Childers® Chil-Low™ CP-38 Vapor Retarder Coating is a high-solids, water-based, and flexible coating designed for use as a vapor retarder over various types of thermal insulation, including polystyrene foam. CP-38 is UV-resistant and has a mild, latex "paint-type" odor. It is formulated for use on pipes, vessels, ducts, and equipment that operate within a range of cryogenic to ambient temperatures.

Childers® ENCACEL® X CP-40 Vapor Retarder Coating is an elastomeric, polymer-based coating primarily created to safeguard thermal insulation. In addition, ENCACEL® X CP-40 exhibits outstanding chemical resistance, further enhancing its durability and performance. Moreover, this coating serves as an effective weather barrier, safeguarding insulation and maintaining its integrity even in challenging weather conditions.

Childers® CHIL-SEAL® CP-50A HV2 Coating is a high-viscosity, white coating known for its heavy, cream-like consistency. It doubles as an excellent adhesive and is easily applied with brushes. Despite its ease of application, it forms a durable film, even on surfaces like glass cloth or canvas. This water-based material is safe to use, as it does not damage plastic foams or other adhesives, and cleaning brushes and tools is a simple process with water.

Childers® Chil-Perm® WB CP-35 Vapor Retarder Coating is a high-performance water-based vapor retarder coating suitable for various applications. It works effectively for both interior and exterior use, including low-temperature and some dual-temperature scenarios. This fast-drying coating forms a durable and flexible dry film that hinders the flow of vapor through insulation systems.

Childers® CP-34 Vapor Retarder Coating is a water-based coating designed for use over various thermal insulation materials, including polystyrene foam. It serves as an excellent choice for creating a vapor-retarding seal on ASJ, FRK, and FSK jackets and board facings, particularly at joints, laps, and weld pin punctures.

Childers® Chil-Perm® CP-30 Low Odor Vapor Retarder Coating is a highly effective coating designed for low-temperature applications. It has a unique consistency in its wet state, making it suitable for heavy or thin film applications. This coating is formulated with an elastomeric resin, resulting in a tough and flexible dry film with strong adhesive properties.

Childers® Fibrous Adhesive CP-97 is a sodium silicate-based adhesive known for its exceptional strength. Notably, it is non-flammable when in a wet state and becomes incombustible once dry. As it ages, it strengthens the bonds it forms, ensuring a secure connection. Additionally, this adhesive provides excellent coverage, making it an economical choice for various applications.