Products

Millennium Lockin' Pocket® Inter-Locking Flashing System is a pre-fabricated inter-locking pocket that is easily assembled on-site and filled with fast-setting, solvent-free, Millennium Hurricane Force® Universal Sealer Extreme. The system becomes waterproof within minutes of application. Millennium Lockin’ Pocket® is available in different packaging options. The pre-fabricated pockets simply connect with tongue and groove joints and are composed of a high-strength, flexible elastomer. All pieces are easily joined by a patented* locking system to create a pocket of the desired size.

Millennium One Step™ Multi-Bead Applicator is an innovative application equipment that operates on battery power, eliminating the need for cords or hoses. It is designed to set adhesive ribbons at prescribed placements, ranging from 3 to 12 inches on center. ith its convenient features and reliable performance, the Millennium One Step™ Multi-Bead Applicator provides an efficient solution for adhesive application processes.

Millennium One Step™ Pneumatic Applicator is designed to be used with Millennium One Step™ Adhesives and Sealants. The applicator uses compressed air to drive the pistons and can deliver a maximum thrust of approximately 1,500 pounds. The One Step™ Pneumatic Single Bead Applicator must be used with an air compressor (not included).

Millennium One Step™ Battery Powered Applicator is specifically designed to be used with the Millennium One Step™ family of adhesives and sealants. The unique carriage design is extremely durable and allows the user to install adhesive in an upright position, eliminating back strain. The tool is powered by a Li-ion 20-volt rechargeable battery. The motor is designed to run at lower amps than conventional cordless tools, which extends overall battery life and reduces charging time.

Millennium Cyclone Low Pressure Pump Cart is a versatile application equipment designed to accommodate 5-gallon 2-part adhesive sets. It features a lightweight and maneuverable design, along with solid core tires for easy mobility. This pump cart is specifically used for dispensing two-component 1:1 ratio low-rise foam polyurethane adhesives in traditional bead application.

Millennium Cyclone 5/15 VS Plus Pump Cart is an application equipment designed with a dual-speed feature for low-pressure spray or ribbon application. It enables fast and cost-effective installation of fleeceback membranes. The pump cart also includes an easy tilt-up drum loading feature. It is specifically used for dispensing two-component 1:1 ratio low-rise foam polyurethane adhesives, whether through low-pressure spray or traditional bead application.

Millennium One Step™ Manual Applicators are reliable application equipment designed for manual dispensing of 1.5L Millennium One Step™ and Hurricane Force® two-component adhesives. They are recommended for smaller roof projects or can serve as a temporary backup to power dispensers. With the Millennium One Step™ Manual Applicators, you can accurately and effectively dispense adhesives for various applications.

Millennium Cyclone 5/15 Low Pressure Pump Cart is a bulk delivery system specifically designed to dispense two component, 1 : 1 ratio low viscosity polyurethane adhesives. These adhesives are widely used to adhere rigid insulation and cover boards to structural roof decks as well as fleece-backed single-ply membranes in both new roofing and recover applications. The Cyclone includes one applicator nozzle and 50 feet of hose.

Foster® Reloadable Cartridge Gun 50-20 is a durable, steel-drive cartridge gun designed for the dispensing of Foster® sealants. It simplifies the application process with 5-gallon pails, resulting in improved efficiency. Additionally, it helps reduce waste and lowers costs compared to disposable cartridge tubes.

Millennium Cyclone System Solution is a specially formulated flushing solution designed exclusively for use with the patented Millennium Cyclone* by Garlock. Packaged in a convenient 1-gallon container, this product is equipped with quick-connect fittings for effortless and efficient usage. It cleans and removes residual adhesive prior to long-term storage, keeping pumps, hoses, and manifolds clean.

Foster® Cartridge Loading Plate 51-05 is a reusable plate designed for 5-gallon pails to simplify the loading process of the 50-20 Reloadable Cartridge Gun. It features a quick push-on and pull-off seal for convenient use. Leaving the cartridge loading plate on the pail surface reduces exposure to air, minimizing the risk of the product drying out. When used with the Reloadable Cartridge Gun, it keeps the gun barrel and threads clean and prevents air from entering the barrel during loading.

Weld Mount SHC-750 is a black single hose/cable clamp. This versatile product, falling under equipment and parts, is part of adhesive equipment consumables. Available as single or double units, these hinged clamps can be mounted using our 1/4" x 20. Which is manufactured from black polypropylene.

Weld Mount ST125-1420-16SS is a versatile solution for industrial applications. Falling under the equipment and parts category, this product features a stud thread size of #8-32. Enhance your projects with the reliability and functionality of Weld Mount ST125-1420-16SS for secure and efficient connections in various industrial settings.

Weld Mount PS62-832-24SS is a versatile solution for industrial applications. Falling under the equipment and parts category, this product features a stud thread size of #8-32. Enhance your projects with the reliability and functionality of Weld Mount PS62-832-24SS for secure and efficient connections in various industrial settings.

Weld Mount AT-8 is a versatile solution for efficient wire management. This product falls under the adhesive equipment consumables and supplies category, making it an essential tool for keeping cables organized.