Products

Tonsan® 1533 White is a two-component adhesive that can cure quickly at room temperature, providing excellent sealing and bonding. This material is recommended for potting electronic components, particularly junction boxes on PV modules. It has excellent dielectric properties and V1 flame retardancy.

H.B. Fuller MP54420 is a two-part epoxy hybrid adhesive designed for bonding metals and plastics with quick curing at room temperature to a tough, semi-rigid material. It features controlled flow characteristics that provide good wetting without excessive running or dripping, as well as excellent vibration and impact resistance. The product also resists water spray, inorganic acids and bases, and most organic solvents. The recommended 2A:1B volume mix ratio is ideal for use in side-by-side dispensing cartridges and metering, mixing, and dispensing equipment. At room temperature, MP54420 reaches a handle cure within 6–12 hours, but cure time can be accelerated with heat. It's worth noting that cooler temperatures increase work and cure times, and substrate heat-up time should be taken into account.

Hydra FAST-EN® DC-13239 is a water-borne, two-part sprayable adhesive designed to bond various substrates found in the marine industry. These include open cell urethane foams, foam-backed headliners, marine carpet, fiberglass (bare and gel-coated), treated wood, aluminum, and various fabrics and plastics. The system is user-friendly and addresses many of the common problems encountered with other two-part systems. Other applications where the use of solvent based, flammable and non-flammable systems is a concern for either health or environmental reasons may also be suitable candidates for the use of this product.

H.B. Fuller 46580/56580 is a thixotropic, extra-fast-setting, two-component epoxy adhesive. It has a convenient mix ratio, excellent sag resistance when applied to vertical surfaces, and a smooth paste consistency. It is recommended for rapid repairs and electrical and industrial staking. H.B. Fuller 46580/56580 extra-fast setting epoxy is an excellent general-purpose adhesive. It is recommended for substrates such as metals, carbon steel, stainless steel, aluminum, plastics, epoxy, stone, wood, glass, china, and leather. H.B. Fuller 46580/56580 is available in the unique DOUBLE-BUBBLE® job-sized package as Reorder No. 04008.

Tonsan® 1521 White is a two-component adhesive that can cure quickly at room temperature, providing excellent sealing and bonding. This material is recommended for potting electronic components, particularly junction boxes on PV modules. It has good thermal conductivity and flame retardancy.

Tonsan® 1522 White is a two-component adhesive that can cure quickly at room temperature, providing high bond strength. This material is specifically recommended for use with metals, plastics, and glass, and is particularly suitable for sealing and bonding PV modules.

Hydra FAST-EN® DC-13634 is a two-part sprayable adhesive for bonding open-cell urethane foams to other porous or non-porous surfaces. It can bond various materials, such as other open- or closed-cell foams, plastics, fabrics, some woods, and metals. The adhesive has good wet grab and can create immediate bonds. It is user-friendly and solvent-free, addressing common problems found in other two-part systems. This product is suitable for applications where solvent-based, flammable, or non-flammable systems are a concern for health or environmental reasons.

Isa-Pur™ 2072 is a polyurethane adhesive that uses polyaddition curing. It is a semi-structural, two-part resin and binder system that is pourable and has a low application viscosity. This adhesive has a pearl white color and is specially designed for applications in the filter industry.

Hydra FAST-EN® DC-13431 is a water-based adhesive designed for use in foam fabrication that can be sprayed or coated. Its primary purpose is to bond open-cell polyurethane foam to itself, and it can be used in a 2-part spray operation or as a wet laminating 1-part spray or coating adhesive.

Thermonex® 3086 is meticulously engineered as a ready-to-use contact adhesive specifically for automotive interiors. It boasts a range of advantages, including enhanced ease of processing, exceptional performance, remarkable substrate adhesion, heat resistance, and impressive durability. This adhesive is precisely tailored to meet the stringent requirements of the automotive and transportation sectors.