Products

Cyberbond CB 2008 is a cyanoacrylate with extremely good properties for bonding rubber (especially EPDM) and plastics with each other or in combination. The aging properties of these joints are outstanding. The overall properties made CB 2008 (like CB 2006) a favorable EPDM bonder. Compared to CB 2006, the viscosity is slightly lower. The low viscosity allows for very thin bonding layers.

GorillaPro® CA30 is a low-viscosity, rapid-curing instant adhesive. It is specifically designed to bond a wide range of similar and dissimilar materials. In most applications, it achieves handling strength within 5 to 10 seconds. It can also be post-applied if necessary.

H.B. Fuller EA6111 is a fast cure, low-viscosity, UV/moisture double-cure adhesive. This product is a conformal coating material designed for protection from moisture and harsh chemicals. It can be cured in shadowed areas. This product is designed for circuit board protection.

TruTac™ Insulation Adhesive 2128 is a fast-tack, high solids, acrylic, water-based pressure sensitive (PSA) adhesive developed for rapid assembly of fiberglass insulation, nonwovens, and light-weight materials. It bonds while still wet and resists heat, humidity, moisture, vibration, and freezing temperatures.

Cyberbond CB 2800 is a very fast-setting cyanoacrylate with extremely good properties for bonding rubber (especially EPDM) and plastics with each other or in combination. The aging properties of these joints are outstanding. CB 2800 is a grade with a very low viscosity that shows wicking properties. It is also known as CB 2000 W.

H.B. Fuller RP30 is a low-viscosity, rapid-curing cyanoacrylate adhesive for general-purpose bonding. This product is designed to bond a wide range of similar and dissimilar materials. Its handling strength in most applications is 5 to 10 seconds. This product can be post-applied.

H.B. Fuller 2003 is a single-component, low-viscosity cyanoacrylate adhesive that is suitable for general-purpose applications on metals, rubbers, and plastics. The product is approved according to ISO 10993-5 for biocompatibility, making it suitable for use in medical device applications. It has the consistency of a wicking liquid.

H.B. Fuller 1527L is a low viscosity, one-component, neutral cure silicone adhesive and sealant. It is a UL94 certified flame retardant material with excellent adhesion to a wide range of substrates. This adhesive offers low/no odor and high heat resistance, as well as superior UV resistance and weather resistance.

H.B. Fuller 20277 is a one-component, water-based fugitive adhesive and coating material designed for fast drying, clean machining, non-blocking, and excellent lay-flat and humidity resistance. It is suitable for spray, pattern, and extrusion applications and can be used to protect metals, fiberglass, contoured sheets, and other surfaces from weathering and discoloration during transportation.

H.B. Fuller UV890SF-150D is a 1-part UV-curable conformal coating adhesive. It is a single-component adhesive with low viscosity and solvent-free properties. UV890SF can be applied using a brush, dip, or spray method. It is commonly used to protect printed circuit boards (PCBs) in various high-reliability applications, making it an ideal conformal coating material for electronic components, including electric motors.