Products

Tuskbond Infusion 707 - 500ml Aerosol Super Mist Spray RTM Infusion Adhesive is a mist spray adhesive developed to hold reinforcement fibres in place during RTM applications.

Tuskbond Infusion 707 - 22L Canister Super Mist Spray RTM Infusion Adhesive is a mist spray adhesive developed to hold reinforcement fibres in place during RTM applications.

H.B. Fuller EA6053H is a fast-curing adhesive that utilizes UV light to cure. The product possesses a soft and flexible nature, while also exhibiting excellent adhesion properties. This adhesive can be used as a replacement for silicone rings in buffering applications. It is capable of providing good adhesion to a variety of substrates, including glass, plastics, and metals.

H.B. Fuller EA6062 is a fast UV-cure adhesive with a high depth of cure. This product is very soft and flexible and has excellent adhesion and dimensional stability after dispensing. It can be used as a re-enterable form-in-place or cure-in-place gasket material. H.B. Fuller EA6062 has excellent compressibility, elastic recovery, and low compression set.

H.B. Fuller EA6056 is a fast UV-cure adhesive designed for waterproof applications. It is a very soft material when cured. This product has shown excellent adhesion and is flexible. It can be used to replace a silicone ring for buffering and waterproof applications.

H.B. Fuller WB2745N is a water-based adhesive known for its low adhesion performance and low solid content. It provides sufficient bonding while maintaining the softness of substrates, ensuring a clean running process. This adhesive is highly concentrated and can be diluted with a maximum of 1-2 parts water. It is commonly used for lamination applications, particularly in the production of bath tissue and paper towel.

Hydra FAST-EN® DC-12623 is a one-part sprayable contact adhesive that is designed to bond various porous surfaces, especially open-cell polyurethane foams. The system is low-cost, highly stable, user-friendly, and allows for quick mating of surfaces after adhesive application. Hydra FAST-EN® DC-12623 provides good bonds in lay-flat scenarios and can be used with higher-strength urethane foams. Sprayed materials can be wet-mated (for lay-flat) or dry-mated (for stress scenarios). The final bonds are soft and supple. Other applications where the use of solvent-based, flammable, and non-flammable systems is a concern for either health or environmental reasons may also be suitable candidates for the use of this product.

Ibucoll™ 7310 N is a solvent-based synthetic rubber adhesive known for its softness and flexibility. It is specially formulated to provide excellent bonding for various materials used in the footwear industry, including leathers, textiles, synthetics, and foams. The adhesive is designed to be sprayable, allowing for easy and efficient application.