Products

Adecol® CQ-4444 adhesive is a thermoplastic rod suitable for use in handguns. The Adecol® CQ-4444 adhesive has rapid melting at application temperature and excellent adhesion to various paper types. It is suggested to use in AP-1000, AP1200, or AP-2250 pistols.

Turf Fix 550 is a two-component, solvent- and water-free polyurethane adhesive. The system consists of Part A, a thixotropic paste, and Part B, a cross-linking hardener. When mixed, they form a uniform-colored paste that is easy to apply using a notched trowel.

H.B. Fuller MS107 is a reactively modified silane that offers good adhesion to many substrates without the need for a primer. It possesses high-performance mechanical properties, is paintable, and exhibits good UV resistance. Its uses include elastic sealing where high strength is required and air filters.

Körapur® 840 is a semi-structural, two-part system of polyurethane adhesive and sealant that utilizes polycondensation curing. It is beige colored and has high impact strength and no significant shrinkage during curing. Additionally, this product offers a wide range of pot life profiles.

H.B. Fuller 3C3115 is a water-based adhesive known for its good adhesion to general corrugated board, including kraft materials. It is commonly used for general-purpose bonding of paper-to-paper, kraft, and corrugated board. This adhesive is particularly suitable for applications in the corrugated industry.

H.B. Fuller EA6206 is a one-component, ultraviolet light-curable adhesive designed for LCD terminal pin bonding applications. The cured adhesive exhibits high flexibility and toughness, good moisture resistance, and good chemical resistance. The product offers excellent adhesion to glass and is ideal for applications such as flat panel displays (FPD).

H.B. Fuller 1521 is a two-component, room-temperature-cure silicone system. It has very low ionic content and can be used for electronic component applications and electronics potting. Its applications include appliance sealing, connector sealing, and junction box potting. Additionally, it has good thermal conductivity and flame retardancy.

Earthic™ 2020 is meticulously designed to meet the rigorous demands of the brewery and mineral water industry. Its outstanding features include remarkable condensation water resistance and ice water resistance, providing unparalleled reliability and durability in various applications within these sectors.

Tonsan® AT 2641 is a 2K PU structural adhesive designed for composite materials bonding. It cures at room temperature or can be accelerated with heating, resulting in excellent adhesion, impact resistance, water resistance, electrical isolation, and corrosion resistance upon curing.

H.B. Fuller HL5500 is a reactive hot melt adhesive that belongs to the category of reactive chemistry. It is specifically designed for use as a primary sealant in Intercept applications, particularly for windows. The adhesive offers extremely low moisture vapor and insulating gas transmission rates. It exhibits good adhesion to glass and spacers, ensuring reliable performance. Additionally, it meets the ASTM E2190 and CGSB 12 8 standards, further emphasizing its quality and suitability for the intended applications.

Foster® Chil-Grab™ Adhesive CP-122 is a solvent-based, non-flammable, fast-tacking, pressure-sensitive adhesive specifically engineered for HVAC insulation applications. It excels at creating a remarkably strong bond. This adhesive is specially formulated for spray application, making it an ideal choice when prioritizing fire safety and aiming for high coverage and production rates.

H.B. Fuller MP5430NS is a two-part modified epoxy adhesive designed for medium-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid polymer and is delivered in a non-sagging viscosity. It provides good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 40 - 50 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Swift®col Health 9595 solvent-borne acrylic self-curing pressure-sensitive adhesive is for manufacturers of medical products and devices who want to adhere to skin.

Swift®col Health 9595 solvent-borne acrylic self-curing pressure-sensitive adhesive provides high initial tack and good adhesion combined with a high wettability to ensure timely bonding. This adhesive is certified as conforming to ISO 10993 biocompatibility standards, including 10993-5 (tests for cytotoxicity) and 10993-10 (tests for skin irritation and sensitization).

This allows manufacturers of medical products and devices to access a toluene-free adhesive solution that adheres quickly to skin and substrate materials.

Swift®col Health 9595 provides high solids to lower drying costs and quick machine run rates for better OEE while ensuring the safest solutions for skin with biocompatible regulatory support.

FULLABOND 164 is a water-based adhesive known for its excellent adhesion to a wide variety of substrates, providing high strength and good flexibility. It is particularly suited for high-speed machine applications, where it delivers strong and flexible bonds to different substrates, making it ideal for corrugated applications.

Cyberbond CB 2008 is a cyanoacrylate with extremely good properties for bonding rubber (especially EPDM) and plastics with each other or in combination. The aging properties of these joints are outstanding. The overall properties made CB 2008 (like CB 2006) a favorable EPDM bonder. Compared to CB 2006, the viscosity is slightly lower. The low viscosity allows for very thin bonding layers.