Products

Swift®therm 3055 is a hot melt adhesive with good adhesion to filter media, reduced shrinkage, and good flexibility. It has been developed for the manufacture of air filters as a pleat separator. Filter media is a suitable substrate for this product.

H.B. Fuller MP54420 is a two-part epoxy hybrid adhesive designed for bonding metals and plastics with quick curing at room temperature to a tough, semi-rigid material. It features controlled flow characteristics that provide good wetting without excessive running or dripping, as well as excellent vibration and impact resistance. The product also resists water spray, inorganic acids and bases, and most organic solvents. The recommended 2A:1B volume mix ratio is ideal for use in side-by-side dispensing cartridges and metering, mixing, and dispensing equipment. At room temperature, MP54420 reaches a handle cure within 6–12 hours, but cure time can be accelerated with heat. It's worth noting that cooler temperatures increase work and cure times, and substrate heat-up time should be taken into account.

Tonsan® 1533 White is a two-component adhesive that can cure quickly at room temperature, providing excellent sealing and bonding. This material is recommended for potting electronic components, particularly junction boxes on PV modules. It has excellent dielectric properties and V1 flame retardancy.

Hydra FAST-EN® DC-13239 is a water-borne, two-part sprayable adhesive designed to bond various substrates found in the marine industry. These include open cell urethane foams, foam-backed headliners, marine carpet, fiberglass (bare and gel-coated), treated wood, aluminum, and various fabrics and plastics. The system is user-friendly and addresses many of the common problems encountered with other two-part systems. Other applications where the use of solvent based, flammable and non-flammable systems is a concern for either health or environmental reasons may also be suitable candidates for the use of this product.

TEC® Totalflex XMS is an ultra-high-performance, one-component, moisture-curing modified silane adhesive suitable for various wall tile applications, countertops, and mosaic tile for shower floors. It is specifically designed for challenging applications, including gaged porcelain tile panels and slabs, exterior building facades, submerged use in pools, and clear and transparent glass. Total Flex XMS provides robust non-sag/non-slump adhesion, long open time, and extra smooth troweling. It adheres excellently to a wide range of substrates and tiles, and no mixing is required.

H.B. Fuller CASEMATE WB 8921 P is a water-based adhesive with excellent adhesion on difficult to bond surfaces. This grade exhibits very good lay-flat properties along with very good machinability. It is easy to clean and has a high wet tack.

Adecol® C-223G adhesive is an aqueous dispersion of a copolymer based on vinyl/ethylene acetate that has been modified with special additives. It has excellent fluidity and initial tack, as well as good grip. This adhesive is typically used for side and bottom closure of envelopes and cardboard boxes, and can be applied using a nozzle in automatic equipment.

H.B. Fuller Lunatack™ B 208 is a hot melt adhesive developed for the perfect binding and gluing off brochures, paperbacks and book blocks in One-Shot System. This product is also used as main glue in the Two-Shot System with Full-Dri™ dispersion as primer.

Foster® Line-FAS™ Adhesive 85-00 is an economical, water-based duct liner adhesive, composed of pure polymer. This adhesive is characterized by its outstanding fire resistance, rapid tack development, and strong bonding capabilities. It provides a reliable and cost-effective solution for securing duct liners in various HVAC applications.

Foster® Fire Resistive Lagging Adhesive And Coating 81-42 is a quick-setting water-based adhesive and coating for indoor use. It's ideal for adhering canvas, glass cloth, or other lagging materials over pipe and duct insulation. Additionally, it is suitable for attaching woven glass fiber tape to the joints of hard fibrous glass insulation boards. This product is designed for marine and industrial applications and can be top-coated with solvent-based paints if needed.

H.B. Fuller All Weather Sealant (12718) is a self-leveling, one-part, modified rubber, solvent-release adhesive, and sealant. It is highly resistant to weather, UV, and ozone, and is easy to apply, providing a long service life. This high-quality, high-solids elastomer is suitable for bonding and sealing metals, galvanized metals, wood, particle board, plywood, rubber, concrete, glass, thermoplastics, thermoset plastics, composites, and low-surface energy substrates.

TruTac™ Insulation Adhesive 2128 is a fast-tack, high solids, acrylic, water-based pressure sensitive (PSA) adhesive developed for rapid assembly of fiberglass insulation, nonwovens, and light-weight materials. It bonds while still wet and resists heat, humidity, moisture, vibration, and freezing temperatures.

Foster® Drion® Contact Cement 85-75 is a fast-setting, water-resistant adhesive for sealing the laps of vapor barrier jackets and is also used for bonding materials to a variety of surfaces in applications where immediate adhesion and high initial adhesive strength are required.

Adecol® C-2140 adhesive is a high-quality adhesive made from a polyvinyl acetate homopolymer in aqueous dispersion, modified with special additives. This adhesive is known for its long open time, good fluidity, and excellent initial tack, making it ideal for use in a range of applications. It provides good performance in machinability and is perfect for micro-corrugated coupling, envelope side closure, and wood component bonding. It can be applied using transfer roll, nozzle, or manual application.

H.B. Fuller 46580/56580 is a thixotropic, extra-fast-setting, two-component epoxy adhesive. It has a convenient mix ratio, excellent sag resistance when applied to vertical surfaces, and a smooth paste consistency. It is recommended for rapid repairs and electrical and industrial staking. H.B. Fuller 46580/56580 extra-fast setting epoxy is an excellent general-purpose adhesive. It is recommended for substrates such as metals, carbon steel, stainless steel, aluminum, plastics, epoxy, stone, wood, glass, china, and leather. H.B. Fuller 46580/56580 is available in the unique DOUBLE-BUBBLE® job-sized package as Reorder No. 04008.