Products

Healthcare & Pharma

Browse Applications

Medical

47 Products in Healthcare & Pharma

SDSWith SDS

TDSWith TDS

Flextra® SBA 5250 + XA 3350

Compatible Substrates & Surfaces:Polyolefins, Polypropylene (PP), Polyethylene Terephthalate (PET)
Features:Good Bonding Strength, High Solids Content, Low Migration, Room Temperature Curing

Flextra® SBA 5250 + XA 3350 is a cutting-edge, two-component solvent-based laminating adhesive designed for high-performance applications. This pure aliphatic adhesive solution adheres to EU and FDA Regulation 21CFR177.1390 for food safety, making it ideal for retort applications up to 135°C.

Full-Care® 3100

Product Type:Hot Melt Adhesive
Application Area:Poly Arm Covers, Medical Drapes, Nonwoven Anesthesia Screens, Nonwoven Main Panels
Compatible Substrates & Surfaces:Elastomers & Rubbers
Features:Good Bonding Strength, High Performance

Full-Care® 3100 hot melt assembly adhesive is for surgical drape manufacturers who want to attach typical components such as nonwoven anesthesia screens, polyarm covers, and nonwoven main panels by using a high-performance adhesive solution.

Full-Care® 3100 hot melt assembly adhesive provides superior bonding with a 24-hour open time to allow for adhesive flowability prior to crystallizing while supporting preferential bonding for rubber or stretch substrates where destructive peel is required.

This allows the manufacturer of surgical drapes to ensure the best experience for the end user and avoid medical personal protective equipment failure in the field during a medical procedure.

H.B. Fuller U305

Product Type:2K (2 component) Adhesive, Radiation Curable Adhesive
Application Area:Catheters, Tubes, Medical Devices, Mechanical Device Assembly, Airway Mask, Balloon Bonding
Compatible Substrates & Surfaces:Polycarbonate (PC)
Features:Medium Viscosity, UV Curable, High Flexibility, High Viscosity, High Performance

H.B. Fuller U305 is a UV-cured adhesive with medium or high viscosity. It provides high flexibility and excellent bonding on a wide range of substrates, particularly polycarbonate. Its uses include catheter assembly, IV sets, tube bonding, airway masks, mechanical device assembly, and balloon bonding in medical device assembly.

Swift®melt 1C2510

Application Method:Roller
Compatible Substrates & Surfaces:Polyethylene (PE), Woven Fabric, Non-Woven Fabric
Features:Good Initial Tack, Skin-friendly

Swift®melt 1C2510 is a pressure-sensitive hot-melt adhesive designed for general-used fixing of medical tape and disposable medical dressing. It applies good initial tack and medium adhesion without glue residue on the skin. It is safe in skin contact and suitable for backing materials such as non-woven and needle-punched non-woven, etc.

Cyberbond 2075

Product Type:1K (1 component) Adhesive, Reactive Adhesive
Application Area:Catheters, Medical Devices, Mechanical Device Assembly, Tube Bonding, Airway Mask, Balloon Bonding
Compatible Substrates & Surfaces:Metal, Elastomers & Rubbers, Fiberglass, Polycarbonate (PC), Plastics, Acrylonitrile Butadiene Styrene (ABS), Poly(Methyl Methacrylate) (PMMA), Phenolics, Polyvinyl Chloride (PVC)
Chemical Family:Cyanoacrylates
Features:General Purpose, Medium Viscosity, High Viscosity

H.B. Fuller 2075 is a cyanoacrylate adhesive known for its fast plastic bonding properties. It has a medium-high viscosity and is a versatile general-purpose adhesive. It finds applications in catheter assembly, IV sets, tube bonding, airway masks, mechanical device assembly, and balloon bonding in medical device assembly.

Cyberbond 2999

Product Type:Reactive Adhesive, 1K (1 component) Adhesive
Application Area:Medical Devices
Compatible Substrates & Surfaces:Steel, Copper, Bronze, Metal, Brass
Chemical Family:Cyanoacrylates
Features:Good Gap Filling Capabilities, Chemical Resistant, High Viscosity

H.B. Fuller 2999 is a single-component, high-viscosity gel cyanoacrylate adhesive. It is ideal for bonding porous materials or for applications where controlling adhesive flow is critical. H.B. Fuller 2999 offers maximum gap filling and repositioning time. It has been certified to ISO 10993-5 for cytotoxicity, making it appropriate for use in medical device applications.

H.B. Fuller TL0600 A/B

Product Type:2K (2 component) Adhesive, Potting Compound
Application Area:Hemodialysis, Medical Applications
Chemical Family:Polyurethanes (PU)
Features:High Viscosity, High Purity

H.B. Fuller TL0600 A/B is a 2K urethane with an amber color and high viscosity. H.B. Fuller TL0600 A/B is commonly used for potting filters and applications where the adhesive is exposed to blood. Its uses also include filter potting.

Cyberbond 5248

Product Type:Eyelash Adhesive, Reactive Adhesive
Chemical Family:Cyanoacrylates
Features:Good Bonding Strength, Long Lasting, Flexible

H.B. Fuller 5248 is a specialized adhesive, formulated for use in sensitive eye applications such as eyelash adhesives. It offers unique features and benefits that make it suitable for longer wear and sensitive eyes. One of the key advantages of H.B. Fuller 5248 is its formulation, which is designed to be gentle on sensitive eyes.

Cyberbond 2003

Product Type:Reactive Adhesive, 1K (1 component) Adhesive
Application Area:Medical Devices
Compatible Substrates & Surfaces:Steel, Copper, Bronze, Metal, Brass
Chemical Family:Cyanoacrylates
Features:Low Viscosity, Chemical Resistant, Good Solvent Resistance

H.B. Fuller 2003 is a single-component, low-viscosity cyanoacrylate adhesive that is suitable for general-purpose applications on metals, rubbers, and plastics. The product is approved according to ISO 10993-5 for biocompatibility, making it suitable for use in medical device applications. It has the consistency of a wicking liquid.

Cyberbond 5000

Product Type:Contact Adhesive, Epoxy Adhesive
Application Area:Medical Devices
Chemical Family:Epoxy & Epoxy Derivatives

Cyberbond 5000 is a medical-grade epoxy with a curing time of 5 minutes. It is transparent and commonly used in the assembly of mechanical devices and medical devices, specifically in the medical market. This product meets the following standards: EN ISO 9001:2015, IATF 16949:2016, EN ISO 13485:2016, and EN ISO 14001:2015.

Cyberbond 2010

Product Type:Instant Adhesive
Application Area:Medical Devices
Compatible Substrates & Surfaces:Titanium, Nickel, Metal, Nitinol, Aluminum, Stainless Steel
Chemical Family:Cyanoacrylates
Features:General Purpose, Low Viscosity

Cyberbond 2010 is an ethyl-based cyanoacrylate with lowto medium-viscosity that bonds exceptionally well to various metals, as well as plastics and rubbers alike. It is well suited for general purpose applications and is also approved for medical devices.

Material Bonding - Metal

Swift®col Health 9595

Chemical Family:Acrylics & Acrylates
Product Type:Solventborne Adhesive, Pressure Sensitive Adhesive
Application Area:ECG Electrodes, Medical Devices
Compatible Substrates & Surfaces:Textiles, Paper, Plastics, Cardboards, Film
Features:Good Cold Flow, Excellent Multi-Substrate Adhesion, Good Adhesion, High Initial Tack, Skin-friendly, Solvent-Based, Skin Contact Acceptable, Self Curing Capable, Biocompatible, Good Wettability

Swift®col Health 9595 solvent-borne acrylic self-curing pressure-sensitive adhesive is for manufacturers of medical products and devices who want to adhere to skin.

Swift®col Health 9595 solvent-borne acrylic self-curing pressure-sensitive adhesive provides high initial tack and good adhesion combined with a high wettability to ensure timely bonding. This adhesive is certified as conforming to ISO 10993 biocompatibility standards, including 10993-5 (tests for cytotoxicity) and 10993-10 (tests for skin irritation and sensitization).

This allows manufacturers of medical products and devices to access a toluene-free adhesive solution that adheres quickly to skin and substrate materials.

Swift®col Health 9595 provides high solids to lower drying costs and quick machine run rates for better OEE while ensuring the safest solutions for skin with biocompatible regulatory support.

Cyberbond 2611

Product Type:1K (1 component) Adhesive
Application Area:Medical Applications, Medical Devices, Appliances
Compatible Substrates & Surfaces:Polypropylene (PP), Nylon, Polyethylene Terephthalate (PET), Low Density Polyethylene (LDPE), Fiberglass, Thermoplastic Polyurethane Elastomer (TPU), Polycarbonate (PC), Polyethylene (PE), Plastics, Wood, High Density Polyethylene (HDPE), Leather, Polyethylene Terephthalate Glycol (PET-G), Polyvinyl Chloride (PVC)
Chemical Family:Cyanoacrylates
Features:Medium Viscosity, Fast Setting, High Viscosity

H.B. Fuller 2611 is a fast-setting, low- to medium-viscosity cyanoacrylate adhesive for use on all types of substrates. It is particularly suitable for setting and adhering rapidly to inactive surfaces such as wood, leather, and fiberglass matting. H.B. Fuller 2611 offers viscosity and flow characteristics ideal for filling small gaps. H.B. Fuller 2611 is certified to ISO 10993-5 for biocompatibility, making it suitable for use in medical applications.

Full-Care® 7250

Product Type:Hot Melt Nonreactive Adhesive, Hot Melt Adhesive
Features:Superior Dry Peel Strength, Low Odor

Full-Care® 7250 is a versatile hot-melt adhesive designed specifically for thinner cores. With high wet strength and improved anchorage, it ensures superior core integrity. This adhesive is widely used in the manufacturing of disposable baby diapers and adult incontinence products to enhance core performance.

Cyberbond 5100

Chemical Family:Cyanoacrylates
Product Type:Contact Adhesive, 1K (1 component) Adhesive
Application Area:Airway Mask, Balloon Bonding, Medical Devices, Medical Applications, Catheters, Mechanical Device Assembly, Tubes
Features:Low Odor, High Viscosity, Non Blooming, Medium Viscosity

H.B. Fuller 5100 is a versatile adhesive suitable for medical applications. It belongs to the chemical family of cyanoacrylates, known for their strong bonding properties. This adhesive has several features, including high viscosity, low odor, and non-blooming characteristics. It finds application in medical devices and assemblies such as airway masks, balloon bonding, catheters, mechanical device assembly, and tubing.

Show

of 47 results