H.B. Fuller logo

UltraShield EMB 25

1 of 21 products in this brand
UltraShield EMB 25 is a single-component, flexible, cold-applied, bitumen-modified acrylic-based waterproofing membrane. It is specially designed from a blend of special resin and rubber, reinforced with water-repelling fillers, mineral stabilizers, and a gelling agent. UltraShield EMB 25 is a highly elastic product that cures to a rubber-like membrane capable of withstanding severe expansion, contraction, and deck movements. It is highly resistant to oxidation, UV light, and ozone due to the unique additives used in its formulation, ensuring it does not crack.

Product Type: 1K (1 component) Coating, Waterborne Coating

Features: Chipping Resistance, Durable, Easy To Apply, Excellent Toughness, Flexible, Good Adhesion, Good Toughness, Good Weather Stability, High Durability, Non-Toxic, Oxidation Resistant, Peel Resistance, UV Resistant, Water-based, Waterproofing

Application Area: Balconies, Basement, Bathrooms, Bridges, Masonry, Roofs, Terraces, Tunnels, Underpasses

Compatible Substrates & Surfaces: Concrete, Masonry

Chemical Family: Acrylics & Acrylates

Technical Data Sheet

Enhanced TDS

Identification & Functionality

Chemical Family
Acrylics & Acrylates
Product Type
1K (1 component) Coating,
Waterborne Coating
Technologies
Ready-to-Use Products
Product Families
Ready-to-Use Products — Paints & Coatings
Protective Coatings

Features & Benefits

Ready-to-Use Product Features
Chipping Resistance,
Durable,
Easy To Apply,
Excellent Toughness,
Flexible,
Good Adhesion,
Good Toughness,
Good Weather Stability,
High Durability,
Non-Toxic,
Oxidation Resistant,
Peel Resistance,
UV Resistant,
Water-based,
Waterproofing
Product Features
  • Tough yet highly flexible.
  • The thermal co-efficient of expansion is similar to concrete
  • More durable than normal asphalt coating
  • Superior adhesion properties ensure a durable bond
  • Resistant to peeling, chipping, and/or separation
  • Excellent durability. Is resistant to UV and weathering effects and does not lose ts properties over time
  • Bonds very wel to concrete and most other substrates
  • Easy to apply, no mixing required

Applications & Uses

Markets
Building & Construction,
Paints & Coatings
Applications
Paints & Coatings — Building & Construction
Roof Coatings
Building & Construction — Building Envelope & Roofing
Waterproofing & Weatherproofing
Building & Construction — Building Materials
Fence, Decks & Rails
Building & Construction — Infrastructure, Roads & Paving
Pavement, Highways, Roads & Bridges
Application Area
Balconies,
Basement,
Bathrooms,
Bridges,
Masonry,
Roofs,
Terraces,
Tunnels,
Underpasses
Compatible Substrates & Surfaces
Concrete,
Masonry
Product Applications

UltraShield EMB 25 is used as waterproofing and protective coating of the following structures:

  • Concrete roofs both flat and sloped
  • Terraces, balconies and domes
  • Masonry and concrete walls
  • Bathrooms and basements
  • Metal profile roofs and asbestos roofs
  • Polyurethane foam slabs and polyester built up roofs
  • Tunnels, underpasses & concrete bridge decks

UltraShield EMB 25 has the unique property of adapting itself over the irregular contours of the deck and forming a waterproof and impervious blanket.

Application Procedure

Surface Preparation: The substrate on which the coating will be applied has to be cleaned thoroughly of all contaminants which may affect the adhesion. All major repair works needs to be carried out with a suitable repair material prior to the application.
 

Priming: Apply a primer coat on the concrete surface using a brush or roller to seal the pores and stabilize the surface by diluting UltraShield EMB 25 with water (75:25 ratio). This will
help in boosting adhesion for the top coat. Allow it to dry completely before applying the acrylic coating.

Application: Apply each coat of UltraShield EMB 25 at a coverage rate of 1 kg / m2 to attain a Dry Film Thickness of 0.50mm.
For best results, apply the coating with a brush, roofing broom or a squeegee. The application of the succeeding coats shall be carried out after the first coat dries off, after a waiting period of at least 8-10 hours.

Curing: The coating shall be cured fully for 7 days to achieve its full mechanical properties.

Properties

Specifications
ValueUnitsTest Method / Conditions
ConsistencyThixotropic Paste--
Density1.05 - 1.15g/ccASTM D 1475
Solid Content55.0%ASTM D 1644
Tensile Strengthmin. 0.5N/mm²ASTM D 638
Tear Resistancemin. 10KN/mASTM D 624
Elongation at Breakmin. 1000%ASTM D 412
Hardness40.0Shore AASTM D 2240
Water Vapor Transmissionmax. 0.5g/h-m²-
Crack Bridging Ability2.0mmASTM C 836
Initial Cure12 - 24hrs-
Final Cure7.0days-
Application Temperature10 - 50°C-
Service Temperature-5 - 70°C-

Packaging & Availability

Packaging Type
Pails
Regional Availability
  • Middle East
Packaging Information

20kg Pail

Storage & Handling

Shelf Life
12 months
Storage Conditions
  • Shelf life is up to eight months from manufacturing date, if stored below 25 °C. Shelf life is up to twelve months from manufacturing date, if unopened, stored under cover, protected from direct sunlight and high temperature.
  • Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.