Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Features
- Specific development: vinyl sheet and tile adhesive
- Versatile: suitable for use on a wide variety of substrates
- Reduces project time: fast, easy application, with a fast drying time
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Guidelines for Use
Preparation:
- Use in a well Ventilated Area.
- Shake well before use.
- Surfaces should be clean, dry and free from grease.
Application:
- Hold the aerosol at approximately 70° to the surface. Spray adhesive from 6-8 inches away onto one or both surfaces.
- Apply adhesive in 4-6 inch bands overlapping each band by roughly 50%, with a double coat applied to the edges. Move at a steady pace that provides an even coat of adhesive without allowing any material to puddle. For most applications, 80-100% adhesive coverage is required for full bond strength. On porous materials, a second coat of adhesive may be necessary.
- For one-way application, let adhesive dry for 30 seconds until tacky, and then press into position.
- For two-way application, spray both surfaces and allow to dry for 2-5 minutes before bonding.
- For temporary bonding, spray one surface and allow to dry for 2-5 minutes before bonding.
- After use, invert the can and spray to clear any adhesive from the valve/button.
Properties
- Physical Form
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Size
Available Sizes:
500ml aerosol
Storage & Handling
- Shelf Life
- 12 months
- Disposal Information
- Once the aerosol is empty of any hazardous materials and depressurised, it can be considered as scrap metal, in accordance with the national or local waste company, under code EWC 15 01 04* (empty aerosol, non-hazardous residues).
- Canisters and aerosols that are still pressurised and contain product should be disposed of in accordance with the national or local waste company under code EWC 16 05 04* (full or partially empty aerosol).
- Storage & Shelf Life
- Protect from extremes of temperature in a controlled environment between 15 and 35°C, and away from direct sunlight. Do not stand on a cold concrete floor. Low temperatures can result in irreparable separation of the adhesive.
- Stored under the correct conditions, in original, unopened containers, the product will have a shelf life of 12 months. The adhesive will have a limited life once the container is opened.