Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Guidelines for Use
Preparation:(500ml)
- Use in a well Ventilated Area.
- Surfaces to be bonded should be clean, dry and dust free.
- Shake aerosol before use.
Application:
- Hold the aerosol at approximately 70° to the surface.
- Apply adhesive to both substrates in 4-6 inch bands overlapping each band by roughly 50%, with a double coat applied to the edges. Move at a steady pace that provides an even coat of adhesive without allowing any material to puddle. Spray one surface vertically the other horizontally. For most applications, 80-100% adhesive coverage is required for full bond strength. On porous materials, a second coat of adhesive may be necessary.
- Allow the solvents to evaporate from the adhesive (2-5 minutes depending on ambient temperature). To know when the adhesive is ready to bond, it should not transfer to a gloved hand when touched and should feel dry. Bonding the substrates before the solvents have
- been allowed to evaporate can cause solvent entrapment resulting in bond failures.
- Bring the two substrates together and apply a uniform pressure over the work piece, starting in the middle and working outwards. Pay particular attention to the edges.
- After use, invert the can and spray to clear any adhesive from the valve/button.
Properties
- Physical Form
- Appearance
- Clear
- Typical Properties
Value Units Test Method / Conditions Application Temperature 15 - 25 °C - Temperature Resistant 100.0 °C - Open Time 1.0 hour - Drying Time 2 - 5 minutes - Cure Time 24.0 hours - Coverage approx. 2.4 m² - Solids Content 33.0 % - Storage Temperature 15 - 35 °C -
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Size
Available Sizes:
- 500ml Aerosol
Storage & Handling
- Shelf Life
- 12 months
- Disposal Information
- Once the canister is empty of any hazardous materials and depressurised, it can be considered as scrap metal, in accordance with the national or local waste company, under code EWC 15 01 04* (empty aerosol, non-hazardous residues).
- Canisters and aerosols that are still pressurised and contain product should be disposed of in accordance with the national or local waste company under code EWC 16 05 04* (full or partially empty aerosol).
- Storage & Shelf Life
- Protect from extremes of temperature in a controlled environment between 15 and 35°C, and away from direct sunlight. Do not stand on a cold concrete floor. Low temperatures can result in irreparable separation of the adhesive.
- Stored under the correct conditions, in original, unopened containers, the product will have a shelf life of 12 months. The adhesive will have a limited life once the container is opened.