Tuskbond FD170 - 500ml Aerosol

Identification

GBU

BAS

RTU Product Type

Adhesive

Categories

Markets → Building & Construction → Applications → Building Envelope & Roofing → EIFS & Insulation

Markets → Building & Construction → Applications → Building Materials → Construction Adhesives

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Solvent-Based Nonreactive Adhesives

Applications

Application Area

Insulation Materials

Application Method

Spray

Compatible Substrates & Surfaces

Metal,

Foam,

Expanded Polystyrene (EPS),

Polyurethane (PU) Foam,

Mineral Fiber,

Phenolic Foam

Applications & Uses

Guidelines for Use

Preparation:(500ml)

• Use in a well Ventilated Area.
• Shake can well before use.
• Surfaces should be clean, dry and free from dust and grease.

Application:

• Hold the aerosol at approximately 70° to the surface.
• Apply the adhesive in 4-6 inch bands overlapping each band by roughly 50%, with a double coat applied to the edges. Move at a steady pace that provides an even coat of adhesive without allowing any material to puddle. For most applications, 80-100% adhesive coverage is required for full bond strength. On porous materials, a second coat of adhesive may be necessary.
• Allow the solvents to evaporate from the adhesive (1-2 minutes depending on ambient temperature). To know when the adhesive is ready to bond, it should not transfer to a gloved hand when touched and should feel dry. Bonding the substrates before the solvents have been allowed to evaporate can cause solvent entrapment resulting in bond failures.
• Carefully position the two substrates. Once brought together an aggressive bond will rapidly form.
• Apply a uniform pressure over the work piece, starting in the middle and working outwards.
• Whilst Tuskbond FD170 forms a very strong initial bond, a full cure will take up to 24 hours.
• After use, invert the can and spray to clear any adhesive from the valve/button.

Features

Ready-to-Use Product Features

High Performance,

Tacky,

Fast Drying,

Long Open Time,

Non-Chlorinated

Features & Benefits

Labeling Claims

Chlorine-free,

Chlorinated Solvents-free,

Dichloromethane-free

Product Features

• Specific development :  designed for bonding polystyrene to itself and various substrates
• High performance : extremely tacky, fast drying and long open time
• Product credentials : non-chlorinated, dichloromethane-free system

Packaging & Availability

Regional Availability

• Europe
• India/MiddleEast/Africa (IMEA)

Packaging Size

Available Sizes:

• 500ml Aerosol

Physical Properties

Physical Form

Aerosol

Properties

Typical Properties

	Value	Units	Test Method / Conditions
Application Temperature	15 - 25	°C	-
Coverage (500ml aerosol, dry coat weight of 25g/m²)	approx. 5	m²/L	-
Curing Time	24	hours	-
Drying Time	1 - 2	minutes	-
Heat Resistance	70	°C	-
Open Time (protected from contamination)	1	hour	-
Solid Content	35	%	-
Storage Temperature	15 - 35	°C	-

Technical Data

	Value	Units	Test Method / Conditions
Base	Hydrocarbon, Acetone	-	-

Storage & Handling

Disposal Information

• Once the aerosol is empty of any hazardous materials and depressurised, it can be considered as scrap metal, in accordance with the national or local waste company, under code EWC 15 01 04* (empty aerosol, non-hazardous residues).
• Canisters and aerosols that are still pressurised and contain product should be disposed of in accordance with the national or local waste company under code EWC 16 05 04* (full or partially empty aerosol).

Storage & Shelf Life

• Protect from extremes of temperature in a controlled environment between 15 and 35°C, and away from direct sunlight. Do not stand on a cold concrete floor. Low temperatures can result in irreparable separation of the adhesive.
• Stored under the correct conditions, in original, unopened containers, the product will have a shelf life of 12 months. The adhesive will have a limited life once the container is opened.

Shelf Life

12 months