H.B. Fuller

Identification

Chemical Family: Polyurethanes (PU)
GBU: EA
RTU Product Type: 2K (2 component) Adhesive

Categories: Markets → Automotive & Transportation → Applications → Automotive → Interior

Markets → Automotive & Transportation → Applications → Bonding & Assembly → Transportation Assembly

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → 2K Liquid Reactive Adhesives

Applications

Application Area: Automotive Interior Trim,

Press Lamination,

Vacuum Lamination,

Transportation Application
Application Method: Spray,

Roll Coater
Compatible Substrates & Surfaces: Leather,

Metal,

Textiles,

Wood,

Polycarbonate (PC),

Acrylonitrile Butadiene Styrene (ABS),

Artificial Leather,

Pre-treated Olefins,

Sheet Molding Compound (SMC),

Polyethersulfone (PES)

Applications & Uses

Application Guidelines

Preparation - The components must be mixed thoroughly until the mixture shows a uniform color.
Frost protection - Protect Thermonex® XP 01239-094A strictly from frost, product will be damaged.

Cleaning Information

General Instructions - Cured adhesive can only be removed mechanically. Contact your local Sales Office for available cleaning solutions
Cleaner for Tools Water

Drying Information

The recommended maximum drying temperature can be found in the technical data section.
Drying with dry air (< 10 % relative humidity) leads to a faster and very gentle drying process.
During the drying process, the humidity in the drying channel increases strongly.
The excessive moisture content must be reduced either by fresh air supply or by drying out physically.
Caution: The drying time is influenced by the absorbency of the surface, drying temperature, coating weight, air humidity etc. and needs to be checked under real life conditions.

Preparation and Processing Information

Processing
For the bonding of genuine leather, artificial leather and spacer fabrics a single side adhesive application on the carrier is sufficient. The coating weight for the single side application should be in the range of 180-250 g/m2 wet. A lad- der study on the chosen substrates is recommended.
Drying
The recommended maximum drying temperature can be found in the technical data section. Drying with dry air (< 10 % rel. humidity) leads to a faster and very gentle drying process. During the drying process, the humidity in the drying channel increases strongly. The excessive moisture content must be reduced either by fresh air supply or by drying out physically. Caution: The drying time is influenced by the absorbency of the surface, drying temperature, coating weight, air humidity etc. and needs to be checked under real life conditions.

Processing Information

Suitable Substrates - Artificial leather, Pretreated olefines, Various metals Acrylonitrile, butadiene styrene, polycarbonate, Polyester, Sheet moulding compound, Leather, Textile, Wood
Surface Requirements - Minimum surface tension 40 mN/m, dry, clean, free of grease, free of dust, free of oil
Application Method - Roller coating, Spraying and Single side application
Lamination Process - Press lamination, Manual lamination and Vacuum lamination
Product is free of Organic solvents
For the bonding of genuine leather, artificial leather and spacer fabrics a single side adhesive application on the carrier is sufficient.
The coating weight for the single side application should be in the range of 180-250 g/m² wet.
A ladder study on the chosen substrates is recommended.

Features

Ready-to-Use Product Features: Good Adhesion,

Good Sagging Resistance,

Heat Resistance,

High Hydrolytic Stability,

High Bond Strength

Features & Benefits

Labeling Claims

Organic Solvents-free

Product Benefits

High initial bonding strength
High heat resistance
Good hydrolysis stability
Sag resistant
Very good adhesion with single side adhesive application

Product Benefits

High initial bonding strength
High heat resistance
Good hydrolysis stability
Sag resistant
Very good adhesion with single side adhesive application

Packaging & Availability

Regional Availability

Global

Physical Properties

Physical Form: Dispersion

Storage & Handling

Storage Information

Thermonex® XP 01239-094A should be used within the shelf life specified on the packaging. The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature).