Thermonex® 063-05A
1 of 21 products in this brandRTU Product Type: 2K (2 component) Adhesive, Waterborne Adhesive
Application Area: Automotive Interior Trim
Compatible Substrates & Surfaces: Acrylonitrile Butadiene Styrene (ABS), Artificial Leather, Leather, Polycarbonate (PC), Polyethersulfone (PES), Polyvinyl Chloride (PVC) Film, Pre-treated Olefins, Sheet Molding Compound (SMC), Textiles, Thermoplastic Polyolefin (TPO), Wood
Application Method: Roll Coater, Spray
Chemical Family: Isocyanates, Polyurethanes (PU)
Features: Excellent Hydrolysis Resistance, Good Bonding Strength, Heat Resistance, Long Open Time, Water-based
Enhanced TDS
Identification
- Chemical Family
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
Features
- Ready-to-Use Product Features
Features & Benefits
- Labeling Claims
Packaging & Availability
- Country Availability
- Regional Availability
Properties
- Component A
-
Value Units Test Method / Conditions Activation Temperature min. 55 °C - Solid Content 43 - 47 wt.% Internal HBF Standard PSA 10 Storage Temperature 10 - 35 °C - Viscosity 200 - 400 mPa·s Internal HBF Standard PSA 3.1 - Uncured Properties
-
Value Units Test Method / Conditions Open Time 4 - 8 hours Internal HBF Standard Processing Temperature 15 - 35 °C - - Cured Properties
-
Value Units Test Method / Conditions Curing Time 3 - 7 d - Pot Life (at 20°C) max. 8 hours Internal HBF Standard Pot Life (at 30°C) max. 4 hours Internal HBF Standard - Component B
-
Value Units Test Method / Conditions Isocyanate Group Content (Clearbond™ TMX hardener 100B) 21 - 22 % Internal HBF Standard PSA 14 Isocyanate Group Content (Thermonex® hardener 004B Black) 17 - 18 % Internal HBF Standard PSA 14 Isocyanate Group Content (Thermonex® hardener 006B Blue) 17 - 18 % Internal HBF Standard PSA 14 Isocyanate Group Content (Thermonex® hardener 007B Blue) 18 - 21 % Internal HBF Standard PSA 14 Isocyanate Group Content (Thermonex® hardener 009B Blue) 17 - 18 % Internal HBF Standard PSA 14 Mixing Ratio (Part A:B) 100:5 - - Mixing Ratio (Part A:B) 100:5.5 - - Solid Content (Clearbond™ TMX hardener 100B) 100 wt.% Internal HBF Standard PSA 10 Solid Content (Thermonex® hardener 004B Black) 83 - 85 wt.% Internal HBF Standard PSA 10 Solid Content (Thermonex® hardener 006B Blue) 83 - 85 wt.% Internal HBF Standard PSA 10 Solid Content (Thermonex® hardener 007B Blue) 85 - 95 wt.% Internal HBF Standard PSA 10 Solid Content (Thermonex® hardener 009B Blue) 83 - 85 wt.% Internal HBF Standard PSA 10 Storage Temperature (Clearbond™ TMX hardener 100B) 10 - 35 °C - Storage Temperature (Thermonex® hardener 004B Black) 10 - 35 °C - Storage Temperature (Thermonex® hardener 006B Blue) 10 - 35 °C - Storage Temperature (Thermonex® hardener 007B Blue) 10 - 35 °C - Storage Temperature (Thermonex® hardener 009B Blue) 10 - 35 °C - Viscosity (Clearbond™ TMX hardener 100B) 1,000 - 1,200 mPa·s Internal HBF Standard PSA 3.3 Viscosity (Thermonex® hardener 004B Black) 200 - 700 mPa·s Internal HBF Standard PSA 3.3 Viscosity (Thermonex® hardener 006B Blue) 200 - 700 mPa·s Internal HBF Standard PSA 3.3 Viscosity (Thermonex® hardener 007B Blue) 600 - 1,100 mPa·s Internal HBF Standard PSA 3.3 Viscosity (Thermonex® hardener 009B Blue) 200 - 700 mPa·s Internal HBF Standard PSA 3.3
Storage & Handling
- Storage Information
-
- Thermonex® 063-05A should be used within the shelf life specified on the packaging.
- The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature).
- Shelf Life
-
6 months, 6 months (Clearbond™ TMX hardener 100B), 6 months (Thermonex® hardener 004B Black), 6 months (Thermonex® hardener 006B Blue), 6 months (Thermonex® hardener 007B Blue), 6 months (Thermonex® hardener 009B Blue)
Technical Details & Test Data
- Processing Information
-
Processing
For the bonding of genuine leather, artificial leather and spacer fabrics a double side adhesive application on the laminate and on the carrier is necessary to achieve the maximum bonding performance. For foil applications a single side adhesive application on the carrier is sufficient. Equipment, containers, hoses, etc. which come into contact with Thermonex® 063- 05A must be of corrosion resistant material (i.e. stainless steel 1.4541 or 1.4571 or plastic) to avoid coagulation. Any contact with non-ferrous metals (like hoses, sealing rings, filter bodies, etc.) must be avoided in any case. The adhesive can be applied by spraying out of a pressure pot or with automated mixing systems. The use of HVLP spray guns minimizes overspray. Also roller coating is possible as an application system. For more details please contact our technical service team.
Drying
The recommended maximum drying temperature can be found in the technical data section. Drying with dry air (< 10 % rel. humidity) leads to a faster and very gentle drying process. During the drying process, the humidity in the drying channel increases strongly. The excessive moisture content must be reduced either by fresh air supply or by drying out physically. Caution: The drying time is influenced by the absorbency of the surface, drying temperature, coating weight, air humidity etc. and needs to be checked under real life conditions.