Swift®therm 2003 PO
1 of 18 products in this brandRTU Product Type: Hot Melt Adhesive
Application Area: Automotive Interior Trim, Construction Applications
Compatible Substrates & Surfaces: Aluminum Alloys, Plywood, Polypropylene (PP), Thermoplastic Polyolefin (TPO), Wood
Application Method: Roll Coater
Chemical Family: Polyolefins
Features: Excellent Bonding, Good Green Strength, Good Softening Point, Long Open Time, Transparent
Enhanced TDS
Identification
- Chemical Family
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
Applications & Uses
- Application Guidelines
-
Initial Strength - A high initial green strength is achieved once the adhesive has cooled down to ambient temperature.
- Cleaning Information
-
Clean tools immediately after use
- Preparation Information
-
- Surface Requirements - Substrate temperature must not be lower than 70°F.
- Surface should be Dry, Clean, Free of grease, Free of oil
- Processing Information
-
- Suitable Substrates - Thermoplastic polyolefin foil, Plywood Various aluminum alloys, Polypropylene(untreated), Wood, Various other substrates
- Application Method - Roller coating
- Lower temperatures than recommended can cause higher viscosity which result in reduced bond strength and reduced wetting.
Features
- Ready-to-Use Product Features
Features & Benefits
- Product Benefits
-
- Good bonding at elevated temperature
- High softening point
- High green strength
- Especially suitable for polar and nonpolar surfaces
- Long open time
Packaging & Availability
- Regional Availability
Physical Properties
- Physical Form
Storage & Handling
- Storage Information
-
- Swift®therm 2003 PO should be used within the shelf life specified on the packaging.
- The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature)