Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Characteristics
- excellent balance of adhesion and cohesion to a wide range of substrates
- good adhesion at low temperatures
- high share of fossil-free and sustainable raw materials
- Product Highlights
Swift®melt Earthic™ 9010E is a sustainable pressure-sensitive hot melt adhesive that contributes to the replacement of fossil-fuel resources by renewable feedstocks. Designed to help customers lower the overall CO₂ impact, this near carbon neutral* adhesive is produced in an ISCC+ certified facility and provides excellent adhesion at low temperatures. Suitable on a variety of sustainable substrates, Swift®melt Earthic™ 9010E wide range of requirements for the pressure-sensitive adhesive for label stock applications.
- Produced in an ISCC+ facility, providing full supply chain transparency.
- High share of fossil-free and sustainable raw materials (>70%).
- Good adhesion to a wide range of substrates. including various types of plastic films (PE, PP, PET) or paper.
- Excellent balance of adhesion and cohesion.
- Wide range of applications from fridge up to 60°C.
- Excellent machinability.
- Non-direct food contact compliance.
Note: * - Final calculations pending.
- Product Characteristics
- excellent balance of adhesion and cohesion to a wide range of substrates
- good adhesion at low temperatures
- high share of fossil-free and sustainable raw materials (>70%)
Applications & Uses
- Markets
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Application Instructions
Application: by slot die or roller coating at 150°C – 180°C (depending on the applicator type).
- Typical Applications
This grade has been developed for label stock production to be used for general purpose label application.
- Product Application
This grade has been developed for label stock production to be used for general purpose label application.
Suitable Substrates: Various types of plastic films like PE, PP, PET or paper.
Application Instructions: Application: by slot die or roller coating at 150°C – 180°C (depending on the applicator type).
Properties
- Typical Properties
Value Units Test Method / Conditions Softening Point (R&B)* 82 - 98 °C ASTM E28-99 Viscosity (Brookfield DV II, Sp27, 20rpm, at 160°C)* 5000 - 8000 mPa.s - Softening Point 82 - 98 °C R&B - ASTM E28-99 Viscosity (at 160°C, Sp27, 20rpm) 5000 - 8000 mPa.s Brookfield DV II - Note
Typical values only, slight variations may occur but will not affect product’s meeting the standard technical parameters as stated; please consult our CoA for more details (available on request).
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
Storage & Handling
- Shelf Life
- 12 months, 12 months*
- Storage Conditions
In original sealed packaging protected from sun, dust, moisture, and high temperatures. Clean and dry conditions above +15°C and below +25°C.
- Storage Information
The product in original sealed packaging protected from sun, dust, moisture, and high temperatures. The product to be stored in Clean and dry conditions above +15°C and below +25°C.