Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Characteristics
- very high cohesion performance and high shear adhesion
- high heat and plasticizers resistance with good stability over time
- good shrinkage resistance
- suitable for monomeric and polymeric PVC
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Product Application
Application Instructions: Product should be coated with proper coating equipment to release paper or release film. After being dried it should be coupled with substrate. It could also be applied to the substrate. It is very important that the adhesive is perfectly dry before lamination. Traces of residual solvent could inhibit cross-linking of the polymer, which leads to a decrease of technical characteristics comparing to the specifications. Product can be diluted with different solvents such as ketones, aromatic and aliphatic hydrocarbons, esters: solvents must be anhydrous. If needed, product can be extra cross-linked using liquid Isocyanate.
Properties
- Physical Form
- Appearance
- Low viscous liquid
- Typical Properties
Value Units Test Method / Conditions Solids Content approx. 42 % - Density (at 20°C) approx. 0.9 g/cm³ - Viscosity (at 25°C) 1000 - 1500 mPa.s -
Storage & Handling
- Shelf Life
- 12 months
- Storage Information
The product in original sealed packaging protected from sun, dust, moisture, and high temperatures. The product to be stored in Clean and dry conditions above +5°C and below +35°C. Very low storage temperatures can lead to a reversible increase of viscosity to the product. Do not expose to heat.