Swift®col 9668

• very high cohesion performance and high shear adhesion
• high heat and plasticizers resistance with good colour stability over time
• suitable for use on monomeric and polymeric PVC

High performance tapes, durable graphics.

Application Instructions: Product should be coated with proper coating equipment to release paper or release film. After being dried it should be coupled with substrate. It could also be applied to the substrate. It is very important that the adhesive is perfectly dry before lamination. Traces of residual solvent could inhibit cross-linking of the polymer, which leads to a decrease of technical characteristics comparing to the specifications. Product can be diluted with different solvents such as ketones, aromatic hydrocarbons and esters. Mix of aliphatic hydrocarbons also can be used for dilution. Solvents must be anhydrous. Product can be cross-linked using liquid Isocyanate.

The product in original sealed packaging protected from sun, dust, moisture and high temperatures. The product to be stored in Clean and dry conditions above +10°C and below +35°C. Very low storage temperatures can lead to a reversible increase of viscosity to the product. Do not expose to heat.