Swift®col 9529CN
1 of 158 products in this brandSwift®col 9529CN is solvent borne acrylic self-curing pressure-sensitive adhesive. It has high solids content, good cohesion performance, high wettability and initial tack. It is suitable for producing tapes, films or labels. It has broad material availability, such as plastic films (polyethylene, polypropylene, polyester, etc.), natural and synthetic textiles, paper and cardboard, and expanded materials (polyethylene, polypropylene, polyurethane, rubber, etc.).
Compatible Substrates & Surfaces: Cardboards, Elastomers & Rubbers, Paper, Polyesters, Polyethylene (PE), Polypropylene (PP), Polyurethane, Textiles
Features: Good Cohesion, Good Wettability, High Initial Tack, High Solids Content, Skin-friendly
Enhanced TDS
Identification
- Carrier
- GBU
- RTU Product Type
Applications
- Application Area
- Compatible Substrates & Surfaces
- Segment
Applications & Uses
- Application Guideline
-
Final product characteristics:
Products coated with this adhesive have excellent characteristics superior to those coated with traditional solvent-based pressure sensitive adhesives.
Instructions for use:
- Should be coated with proper coating equipment like transfer roll or reverse roll to release paper or release film.
- After being dried it should be coupled with substrate.
- \The product could also be applied to the substrate.
- It is very important that the adhesive is perfectly dry before lamination. In fact traces of residual solvent could inhibit cross-linking of the polymer, which leads to a decrease of technical characteristics comparing to the specifications.
- It can be diluted with different solvents such as ketones, aromatic hydrocarbons and esters. Mix of aliphatic hydrocarbons also can be used for dilution. Solvents must be anhydrous. Where needed it can be cross-linked using liquid Isocyanate.
Features
- Ready-to-Use Product Features
Packaging & Availability
- Packaging Type
- Regional Availability
Physical Properties
- Physical Form
- Appearance
-
Colorless viscous liquid
Properties
- Typical Properties
-
Value Units Test Method / Conditions Storage Temperature 1 - 25 °C - - Characteristics
-
Value Units Test Method / Conditions Solids Content approx. 55 % - Viscosity (at 25°C) 2000 - 4000 mPa.s Brookfield Viscometer - Appearance
-
Colorless viscous liquid
Storage & Handling
- Storage Conditions
-
- In original sealed packaging protected from sun, dust, moisture and high temperatures.
- Clean and dry conditions above 1°C and below 25°C.
- Lower than suggested storage temperatures (particularly during winter) leads to a strong thickening of the solution and consequently to a bad adhesive application.
- No sensitivity to cold and again useable after rewarming.