Sesame® Veneer Splicing Tape PV4548N-051BR
1 of 32 products in this brandSesame® Veneer Splicing Tape PV4548N-051BR is a heat activated adhesive coated on one side on Kraft paper. Sesame® Veneer Splicing Tape is used to unitize green or dried veneer joints to compose veneer panels together. The tape is bonded to the top and bottom across each veneer joint during the veneer composing process.
RTU Product Type: Splicing Tape
Application Area: Tapes, Veneer Panels
Enhanced TDS
Identification
- Backing Material
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
Applications & Uses
- Application Information
-
- If tape is stored below 60°F or above 90°F, you must recondition tape at room temperature for a minimum of 24 hours prior to use.
- Application equipment beyond our control can reduce the length applied. Variables such as temperature, dwell time, tension and the nature of the synthetic materials used can cause this product to shrink
- Product Application
-
Sesame® Veneer Splicing Tape is used to unitize green or dried veneer joints to compose veneer panels together. The tape is bonded to the top and bottom across each veneer joint during the veneer composing process.
Packaging & Availability
- Regional Availability
- Packaging Information
-
- Length per Roll - 457.2
- Tube Size - 7.62cm x 4.8cm
- Average Weight per Roll - 2.35 kg
- Number of Rolls per Pallet - 288 ( 6 rolls per box, 48 boxes per pallet )
- Dimension (W x D x H) - 122cm x 122cm x 122cm
Physical Properties
- Appearance
-
Brown paper with clear adhesive
Properties
- Typical Properties
-
Value Units Test Method / Conditions Length (length per roll) 457.2 m - Maximum Load 23.1 kgf - Reinforcing Material Kraft paper - - Weight (average weight per roll) 2.35 kg - Width 47.8 mm - - Appearance
-
Brown paper with clear adhesive