Rakoll® TE 5714
1 of 47 products in this brandRTU Product Type: Hot Melt Adhesive
Application Area: Edge Banding, Furniture, Softforming, Woodwork
Compatible Substrates & Surfaces: Acrylonitrile Butadiene Styrene (ABS), Chipboard, Continuous Pressure Laminate (CPL), High-Pressure Laminate (HPL), Medium-Density Fibreboard (MDF), Melamine Paper, Polypropylene (PP), Polyvinyl Chloride (PVC), Wood, Wood Veneer
Application Method: Nozzle, Roller, Slot-Die
Chemical Family: Ethylene Vinyl Acetate (EVA)
Features: Good Bonding Strength, Low Coat Weight, Medium Open Time, Very Good Heat Resistance
Enhanced TDS
Identification
- Chemical Family
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
Applications & Uses
- Preparation Information
-
Surface Requirements - Dry, Clean, Free of grease, Free of oil
- Processing Information
-
- Suitable Substrates - Veneer, High pressure laminate, Melamin impregnated papers, Continuous pressure laminate, Solid wood, MDF, Chipboard, Acrylonitrile butadiene styrene, Polypropylene, Polyvinyl chloride
- Application Method - Roller, Nozzle, Slot die
- Lower temperatures than recommended can cause higher viscosity which result in reduced bond strength and reduced wetting.
- During prolonged stops, the temperature of the adhesive must be lowered.
Features
- Ready-to-Use Product Features
Features & Benefits
- Product Benefits
-
- Approved for solid woodedges
- Low coat weight at high line speed
- High initial bonding strength
- Medium open time
- High heat resistance
- Suitable for soft forming application
- Suitable for processing centre
Packaging & Availability
- Regional Availability
Physical Properties
- Physical Form
Storage & Handling
- Storage Information
-
- Rakoll® TE 5714 should be used within the shelf life specified on the packaging.
- The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature).