Rakoll® GXL 3 is an easy-to-apply adhesive that is suitable for many processing conditions and provides very strong bonding. As a PVAc adhesive, it meets the requirements of class D3 as a one-component product. When mixed with Rakoll® GXL-3-Härter, it meets the requirements for the D4 standard DIN EN 204.

Product Type: 1K (1 component) Adhesive, Waterborne Adhesive

Application Area: Doors, Edge Gluing, Finger Jointing, Flat Lamination, Furniture, Lamination, Millwork, Parquet Flooring, Window Frames, Woodwork

Compatible Substrates & Surfaces: Composites, Paper, Wood

Chemical Family: Polyvinyl Acetates (PVA)

Features: Ease of Handling, Good Bonding Strength

Technical Data Sheet

Enhanced TDS

Identification & Functionality

Features & Benefits

Labeling Claims
Ready-to-Use Product Features
Product Benefits
  • Energy savings: Lower press temperatures of approximately 70°C, resulting in energy savings
  • Shorter pressing time: Shortened pressing time of only 40 seconds, at 70°C, for common veneers
  • Versatility: Used for cold, hot, high frequency and short cycle presses, as well as on difficult to bond woods
  • Flexible glued joint: Thermoplastic systems that increase cured glued joint flexibility
  • Environment: No solvents or formaldehydes are used

Applications & Uses

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Viscosity (at 20°C)13000.0mPa·s-
pH3.0--
Open Time8 - 12min-

Packaging & Availability

Regional Availability
  • Africa
  • Europe (Excluding Russia)
  • India
  • Middle East