Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Coating End Applications
- Application Method
Apply when air or substrate temperature is between 40°F (4°C) and 100°F (38°C). For applications outside this range of temperatures, contact ProSpec® Technical Services.
Brush Application:- Dampen, but do not saturate the surface with clean, potable water prior to and during application.
- Use a coarse fiber masonry brush to apply sufficient material to fill all voids. It is essential to work the first coat into all voids, non-moving cracks and holes.
- Finish with a uniform horizontal stroke to assure no pin holes occur and an uniform finish is obtained. If additional coats are applied wait a minimum of 5 hours before applying each coat. Each coat must be applied within 24 hours of previous coat.
- Achieving the published water resistance requires a second coat applied in the opposite direction of the first coat. Do not bridge over existing expansion or control joints.
- Specific Applications
Specific Applications Interior: Thickness¹ Approximate Rate¹ Above Grade 1/16” (1.6 mm) 130 ft² (12 m²) Below Grade - General 3/32” (2.4 mm) 90 ft² (8.4 m²) Below Grade -Negative Hydrostatic Pressure 1/8” (3.2 mm) 65 ft² (6 m²) Exterior: Thickness¹ Approximate Rate¹ Above Grade 1/16” (1.6 mm) 130 ft² (12 m²) Below Grade - General 3/32” (2.4 mm) 90 ft² (8.4 m²) Reservoirs 1/8” (3.2 mm) 65 ft² (6 m²)
Properties
- Physical Form
- Technical Data
Value Units Test Method / Conditions Permeance (at 1/8” (3.2 mm) thickness, TEC® 861 Patch Additive/Water) max. 13 perms E-96 (Desiccant Method) Permeance (at 1/8” (3.2 mm) thickness, Water) max. 17 perms E-96 (Desiccant Method) Set Time (Initial) 3.0 hrs Set Time ASTM C 191 Set Time (Final) 3.5 hrs Set Time ASTM C 191 Compressive Strength (7 days) min. 3,000 psi ASTM C 109 - Air Cured Compressive Strength (28 days) min. 4,000 psi ASTM C 109 - Air Cured Flexural Strength (7 days) min. 1,000 psi ASTM C 78 Hardness (Shore D) min. 65 - D 2240 Water Absorption (4 hours) 0.89 % - Water Absorption (24 hours) 1.61 % - Accelerated Weathering 5000.0 hrs G-23 Sand Abrasion Resistance Passes 500 cycles - D 968 Wind Driven Rain Resistance Excellent - A-A-1555 - Note
Test results obtained under controlled laboratory conditions at 73°F (22.7°C) and 50% relative humidity unless otherwise specified. Tested using 6.5 qt liquid (6.1 L) (3 part TEC® 861 Patch Additive to 3 part water) per 50 lb (23 kg) powder. Reasonable variations can be expected due to atmospheric and job site conditions.
- Note
1 Two coat application (required): Using mixing liquid ~13 perm rating with 3 parts TEC® 861 Patch Additive to 3 parts water.
Packaging & Availability
- Regional Availability
- Packaging Information
This product is available as;
Gray: 50 lb (22.7 kg) bag - Product #7160814858
White: 50 lb (22.7 kg) bag - Product #7161194858
Storage & Handling
- Shelf Life
- 12 months
- Shelf Life
Shelf life of this product is 12 months from the date of manufacture when stored in the original, unopened container, away from moisture, under cool, dry conditions and out of direct sunlight.