Pressen® 2367 is a hot melt pressure-sensitive adhesive for permanent bonding. It serves as a general-purpose PSA with good heat resistance, high tack, and non-staining properties.

Product Type: Hot Melt Pressure Sensitive Adhesive

Application Area: Labels, Thermal Imaging Label

Compatible Substrates & Surfaces: Paper

Features: General Purpose, Good Bonding Strength, Heat Resistance, Non Staining, Tacky

Technical Data Sheet

Enhanced TDS

Identification & Functionality

Features & Benefits

Ready-to-Use Product Features
Product Characteristics
  • general purpose PSA
  • good heat resistance
  • high tack and non-staining

Applications & Uses

Markets
Applications
Application Area
Compatible Substrates & Surfaces
Product Application

Label stock in particular paper and thermal imaging labels..

Application Instructions: Suggested application temperature: 350°F

Cleaning Instructions: Consult the equipment manufacturer for cleanup procedures. After clean-up, flush the applicator thoroughly with hot melt to purge the system.

Properties

Color (Properties)
Typical Properties
ValueUnitsTest Method / Conditions
Softening Point175 - 193°FMettler
Static Adhesion Failure Test Temperature165.0°F-
Peel4.75lb/inch-
Tack Loop4.18lb/inch-
Viscosity (at 350°F)5800 - 7800cPs-

Safety & Health

Safety Advice

To minimize the risk of burns, we recommend the use of eye protection and protective clothing when working near a hot melt applicator. To minimize the risk of flammable vapors, do not exceed a melt temperature above 400°F. Prevent the build-up of vapors. Extinguish all sources of ignition during hot melt use.

Storage & Handling

Shelf Life
730 days
Storage Information

The product to be stored in Clean and dry conditions above 20°F and below 100°F.